bing tracking image
Customer Service My Orders
  1. Home
  2. Help Videos And Articles
  3. Trailer Bearings Races Seals Caps Help Hub
  4. Trailer Bearings Races Seals Caps Q&As
  5. Question 58911
Q & A Icon

What is the Inner Diameter of Trailer Bearings L44649 and L68149  

Updated 07/10/2013 | Published 07/09/2013



Question:

What is the inner diameter of L 44649 and L 68149 bearings?

0

Expert Reply:

The inner diameter of bearing # L44649 is 1.063 inches. The inner diameter of bearing # L68149 is 1.378 inches. Both fit on a #84 spindle.

The matching race for bearing L44649 is # L44610. And the matching race for bearing L68149 is # L68111.

These bearings and races along with a grease seal associated with them (10-19 seal), cotter pin, and tang washer are available together in a kit, # BK2-100. The seal inner diameter is 1.719 inches.

expert reply by:
0
Michael H
Ask The Experts a Question >>

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>
Explore Expert Info Our Expert
on Trailer Bearings Races Seals Caps

Videos

Help Articles

Expert Answers

Others Also Watched
A Closer Look at the Easy Grease Trailer Idler Hub Assembly for 2K Axles
Measuring To Choose The Right Trailer Axle
Curt T-Connector Vehicle Wiring Harness Installation - 2024 Hyundai Palisade
What to Know About the 10" x 1-1/2" Electric Brake Shoe/Lining (One Wheel)
Comprehensive Review: Demco Trailer Brake Mounting Flange
In-Depth Review of the Replacement Race
Others Also Read
Most Popular Wheel Bearings
Trailer Drum Brakes vs. Disc Brakes: Making the Decision
Adapters for Towing a 5th Wheel Trailer with a Gooseneck Hitch
Trailer Wiring Diagrams
5th Wheel Hitch Installation | The Ultimate DIY Guide
How Much Trailer Can I Really Tow
Trailer Tire Sizing
Others Also Asked
Replacement Hubs For EZ Loader Trailer With 2,500 lb Axles

Hello George, thanks for reaching out. We certainly should have a hub option for you. I see that your trailer has a 2,500 lb axle. We do carry hubs for this, but there are a few possible options depending on what bearings/spindle size your trailer…

view full answer...
Which Hub fits an Outer Bearing L44649 and Outer Race L44610

Trailer hubs have two bearings, one is referred to as the inner bearing, closer to the trailer. The outer bearing is the one furthest from the trailer. If we have both of these bearing numbers we can identify which spindle or hub is needed. So far…

view full answer...
Axle Solution for Harbor Freight 4 by 8 Trailer with Jeep 5 Lug Bolt Pattern

Harbor Freight trailers don't use standard trailer axles so replacing the hubs gets challenging so replacing the axles would be the way to go. I'd need the distance between the spring centers of your current axle as well as the distance from…

view full answer...
2,200 lb Rated Trailer Axle Compatible with 15 inch Wheels

The wheel mounting flange of the part #20545I-EZ-60-10 is too small for 15 inch wheels. You would need to get this axle #20545I-EZ-60-15 that comes with hubs compatible with 15 inch wheels.

view full answer...
Axel Flip Lowes 5 x 8 utility trailer

Yes we can get over or under slung axles. It would be very similar to the Dexter Idler Trailer Axle w/ Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,200 lbs part #20545I-EZ-60-10 but you would have them custom make it with the spring…

view full answer...
Replacement Axle For A 2021 Karavan Trailer

Without knowing what size axle you currently had or the weight ability I would not be able to tell you the correct axle for your 2021 Karavan Trailer. If you have no idea what the measurements are you may be able to install The Timbren Axle-Less…

view full answer...
Parts Needed to Move the Spring Seat of the Dexter Axle part #20545I-EZ-60-10

The axle part #20545I-EZ-60-10 that you referenced has a 1-3/4 inch diameter and the #K71-384-00 is designed for a 2-3/8 inch axle so that would not work. What you could use is the #TRSS175 as it is a spring seat confirmed to work on this diameter…

view full answer...
Replacement Axle That is 60 Inches From Hub Face to Hub Face

While we do not make the axles and just sell them, we do carry some axles which measure 60 inches from hub face to hub face and 48 inches from spring center to spring center (the next shortest is 72 inches). You have options depending on if you want…

view full answer...
Trailer Axle Recommendation Where Trailer has 48 inches Between Spring Seat on Center

An axle like the part #20545I-EZ-60-10 will technically fit your trailer since the spring seat dimensions are the same, but each wheel on your trailer will set out an additional 1/2 inch compared to the old axle. Most likely that wouldn't be a…

view full answer...
Recommended Axle With 5 On 4-1/2 Bolt Pattern Idler Hubs And Wheels

I contacted Harbor Freight's tech services line regarding your Haul Master Trailer. Your trailer may have an odd size axle, so the industry standard size parts would not be compatible. Their tech services can't give me the information to help…

view full answer...
Will Slipper Springs be Installed Above or Below New Dexter Axle

If you are installing the Dexter Idler Trailer Axle w/ Hubs #20545I-EZ-60-10 with the U-Bolt Kit #APUBR-10 on your Harbor Freight trailer you will install the slipper springs, either #SP-039275 or #SP-179275, below the axle like in the linked…

view full answer...
Recommended Axle with Hubs and Wheel/Tires for Old Trailer

The pilot hole size is what makes the wheels difficult to match. We have a few options for 5 lug wheels but they all have the 2.81 inch pilot hole in the center. I recommend changing out your axle as you stated to the Dexter Idler Trailer Axle w/…

view full answer...