Will 12" Dexter Electric Brakes w/4 and 5 Bolt Pattern # 23-105-106-09 Fit in Place of Hayes Brakes
Updated 07/18/2024 | Published 07/13/2017 >
Question:
Have a hays center line need the magnit but is discontinued will this fit The brake is12x2 with four hole
asked by: Chuck B
0
Expert Reply:
It looks like your current brakes use the offset 4-bolt mounting pattern. Take a look at the picture I have included that shows the mounting pattern of Dexter Electric Brake Kit for 4 Bolt or 5 Bolt Flange - 12" - Left/Right Hand Assemblies - 6K Item # 23-105-106-09. If yours is the same then the brakes will fit. If not let me know what the bolt pattern is.
expert reply by:
Michael H
0
Product Page this Question was Asked From
Dexter Electric Trailer Brakes - 12" - Left/Right Hand - 6K AL-KO/Hayes Axles
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 12 x 2 Inch Drum
- 6000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand - 6K AL-KO/Hayes Axles
- Search Results: 16 rims
- Search Results: castle nuts
- Search Results: agricultural trailer hubs and drums
- Search Results: dexter axle brakes
- Search Results: brake light
- Search Results: al ko 12" brakes
- Search Results: race punch
- Video: Hands-On with the Dexter Electric Brake Assembly for 4 Bolt or 5 Bolt Flange
- Q&A: Replacement Brakes for Trailer With 12" x 2" Brake Assemblies and 4 Bolt Brake Flange
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Q&A: Will the Dexter 23-105-106-09 Fit AL-KO 5200k Axles
- Shop: Self-Contained Hydraulic Trailer Jack - Square Tube - 24-1/4" Lift - 12,000 lbs - Bolt-On
- Shop: Dexter Electric Brake Assembly for 4 Bolt or 5 Bolt Flange - 12" - Right Hand - 6,000 lbs
- Video: Convert Your 5th Wheel to Gooseneck | MORryde GooseTech 5th Wheel to Gooseneck Pin Box
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 6K
- Shop: Trailer Axle Beam with Easy Grease Spindles - 95" Long - 6,000 lbs
- Shop: Trailer Axle Beam with Easy Grease Spindles - 95" Long - 5,200 lbs
- Video: Review of MORryde 5th Wheel Gooseneck Adapter - GooseTech 5th Wheel To Gooseneck Pin Box - MR87MV
- Q&A: Replacement Axle For a Stealth 7.5X12 Cargo Trailer 3,500-lb 93.5" Hub Face 77.5" Spring Center
- Shop: Fifth Wheel Hitch
- Video: Breaking Down the Dexter Trailer Hub and Drum Assembly for 5,200-lb Axles
- Q&A: Parts Needed to Install Replacement Leg for etrailer and Ram Hydraulic Jack Setup on Dump Trailer
- Video: Hands-On with the Dexter Nev-R-Adjust Electric Trailer Brakes
- Video: Review of Optronics Trailer Lights - Red Tail Light Stop Turn - OPT29NR
- Q&A: Replacement Axle, Brake Assemblies, And Hubs And Drums For M1101 Trailer
- Video: Installation of the B&W Continuum Weight Distribution System on a 2020 Ford F-150
- Shop: Gooseneck Hitch
- Q&A: Can a Hub with Outer Bearing 15123 and LM67048 Both Fit Same Spindle
- Q&A: Is 16 Gauge Wire Adequate for Trailer Wiring for Lighting





Pedro G.
7/18/2024
Hi Michael we're you able to help this customer? I have same brakes and I can't find new ones. The bolt patern match but the offset of the backing plate is different and the shoes hit the drum before I can set the bearing.