Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Yes, you have a couple of ways to test the Dexter DX Series Electric Over Hydraulic Brake Actuator #K71-651. The first test to try is to connect the white wire to the negative post of the battery. Then connect the black wire to the positive post on…
view full answer...The break away system on a trailer would typically have its own battery, like that shown with part #20400. The reason that pulling your break away switch does not actuate your brakes is that it is not wired correctly. The break away switch should…
view full answer...In the diagram that you referenced, that I also attached here, the brake output circuit is a separate circuit that carries power to the trailer brakes totally separate from the brake light circuits. Also, the 12 volt power source is a separate…
view full answer...From what I could find out about your current circuit board, the Atwood Replacement Control Panel #AT91367 will be a direct replacement.
view full answer...We do not have a seal that matches the inner and outer diameter you have provided. That being said, I believe the markings on the seal actually indicate that your ID is 1.25" and our OD is 1.979". Your measurements are incredibly close to…
view full answer...The Glo-Brite 9553 you have currently measures 6-1/2" x 2-1/4" x 2-1/4" so for an incandescent replacement option I recommend the Custer Trailer Tail Light - Submersible - Stop, Turn, Tail - Incandescent - Oval - Red Lens #G65R which…
view full answer...I wasn't able to find any size info for the Glo Brite trailer light you have, but the part #STL72RB that you referenced is a 6-1/2 inch by 2-1/4 inch LED light assembly that can do stop/turn/tail functions that would work great on nearly every…
view full answer...We do have the correct replacement inner member for your LP7500 actuator, which is the following part: - Replacement Inner Member for Dexter DX7.5L Actuator - Single Axle with Disc - 2" Ball - 7,500 lbs #DX39FR This is the replacement for both…
view full answer...You will want to start by following the troubleshooting tips in the manual for the electric over hydraulic actuator, #K71-651. I have outlined them here for you: 1. Verify that the trailer and tow vehicle are wired according to the electrical…
view full answer...With the use of the Dexter Electric Over Hydraulic Actuator part #K71-651 the breakaway battery has to be charged otherwise it won't work. With standard electric drum brakes the brake controller would still control the brakes of your trailer like…
view full answer...I attached a diagram that shows how to match all of the wire colors of the Hopkins Multi-Tow 7-Way Blade and 4-Way Flat Trailer Connector #HM11141144 to the wire colors on your 2017 GMC Canyon.
view full answer...While we do not have a kit that includes everything from the Dexter K71-722-00 bearing kit we do have all the parts that are included with the kit. Inner Bearing #387A Inner Race #382A Outer Bearing #25580 Outer Race #25520 Oil Seal #10-51
view full answer...Filter Your Search
Contact and Help