Result: side loader

I went out to the warehouse and took some measurements of the B&W Tow & Stow 2-Ball Mount item #BWTS10033B. The back hitch pin hole to the weld is 4" and the hitch pin hole closest to the weld is 2-7/8" back. How far back your 2013…

The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C13190 is a great fit for your 2019 Mercedes-Benz GLS550. It is a great hitch that will work well for you. There isn't a specific custom fit for your trailer wiring, so I…

The total height of the B&W Tow & Stow 2-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise item #BWTS10033B is 6 1/2". I have attached a picture with the dimensions drawn on it.

For your 2015 Mercedes Benz ML 350, I recommend you start with the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" #76141 which has a towing capacity rating of 7,000 lbs, so it will work with your trailer. Then I…

When determining what rise/drop to use on a B&W Tow & Stow, it is important that your trailer connection is as level as possible. The first thing you need to do is measure the height of your hitch receiver from level ground to the top inner…

I went out to our warehouse to take a couple measurements on the B&W Tow & Stow 2-Ball Mount #BWTS10033B that will let you determine if there will be any interference between the unit when it's in the stored position and the…

Yes, there are locking pins available for the ball mount portion of the B&W Tow & Stow ball mounts, and they will fit the 10,000 lb capacity and 14,500 lb capacity Tow & Stow ball mounts. The correct part is the InfiniteRule Locking Pins…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…