B&W Tow and Stow Hitch Pin Depth for a TowTector

Updated 03/23/2022 | Published 03/21/2022

Question:

The shaft is a 2inch shaft for the f150 and the towtector needs at min 1.5inch of clearance. The hitch seems to be sunken under the bumper by an 1. Is there any measurements on the BandW shaft length from the pin hole to the back of the vertical area?

asked by: Ben

Expert Reply:

I went out to the warehouse and took some measurements of the B&W Tow & Stow 2-Ball Mount item # BWTS10033B. The back hitch pin hole to the weld is 4" and the hitch pin hole closest to the weld is 2-7/8" back. How far back your 2013 Ford F-150's hitch pin hole is on the receiver compared to how close it is to your bumper will determine if you have enough room for your TowTector.

expert reply by: Jerred H