Lockrack Watersport Carriers
- LR47FR
- Paddle Board
- Roof Mount Carrier
- Bars with T-Slots
- Saddle-Style
- Lockrack
- Track Mount
- No Load Assist
- Side Loading
- Folding
Expandable watersport carrier holds 1 stand-up paddle board with rubber-coated, ratcheting arms and an adjustable base - no need for load straps. Integrated locks secure your board to the carrier. Includes top channel mounting hardware.
Features:
- Adjustable watersport carrier lets you transport 1 SUP on your roof rack
- Unique design removes the need for load straps - bow/stern tie-downs still recommended
- Expandable base has multiple width settings to allow for a wider board
- Removable arms allow your board to be loaded from the side of your vehicle
- Rubber-coated arms protect from damage while securing your board at 4 touch points
- Rotating arms 90-degrees provides overhead clearance when not in use
- Collapsible carrier reduces height to 2-1/2" above your crossbars
- Rubberized strip on top of the carrier's base provides cushioning and slip resistance for your board
- Easily installs in most crossbars' top channels
- Adapter set (sold separately) clamps around most crossbars
- Integrated locking system secures your board in the carrier - includes 4 keys
- Lightweight aluminum construction is corrosion resistant
Specs:
- Application: round, square, aero, elliptical crossbars with top channels
- Carrying capacity: 1 SUP
- Weight Capacity: 175 lbs
- Interior dimensions:
- Minimum: 3" long x 22-1/2" wide x 6-3/4" tall
- Maximum: 4-1/4" long x 41-1/2" wide x 6-3/4" tall
- Exterior dimensions:
- Minimum: 3" long x 27-1/2" wide x 9-1/2" tall
- Maximum: 4-1/4" long x 47" wide x 9-1/2" tall
- Collapsed dimensions: 21" long x 27-1/2" wide x 2-1/2" tall
- Weight: 17 lbs
- 1-Year limited warranty
Adjustable Base for Varying Width Boards![Stand-Up Paddle Board Carrier]()
If you have a diverse collection of SUPs or you want to experiment with different size boards, this carrier will grow with your board collection. LockRack's adjustable stand-up paddle board carrier has an expandable base that works with ratcheting arms, allowing you to carry a variety of different width SUPs.
![Series-X Universal Watersport Carrier]()
![Expandable Base]()
The carrier can expand or contract depending on the size of your SUP. There are 4 holes in the middle expansion piece for the t-bolts once you've adjusted the carrier to your desired width. If your board is wide, you can expand the base, threading the t-bolts through the carrier's base, then through the 2 holes furthest from the center of the bar. If you have a slimmer board, close the gap between the 2 base pieces of the carrier, then thread the t-bolts through the 2 holes closest to the center of the bar.
![Ratchet Arms]()
When your LockRack is not in use, you don't need to uninstall the carrier from your roof. Just remove the arms, rotate them 90-degrees, and then reinsert them so that they lay parallel with the roof of your vehicle. This will reduce wind noise and give you more clearance when parking in your garage.
No Load Straps Needed![Stand-Up Paddle Board Carrier]()
![Stand-Up Paddle Board Carrier]()
This carrier's two sets of curved, ratcheting arms firmly hold your boards and boats in place on your way to and from the water. Its design removes the need for load straps, however, bow/stern tie-downs are still recommended as they prevent your board from shifting forward or backward during travel, especially during sudden starts or stops.
![Ratchet Arms]()
![Additional Straps]()
To load your SUP on to the Series-X you'll first need to remove the arms from one side of each carrier. To remove each arm, put the key in, rotate it, and pull the arm out, giving you access to the carrier's base. Once your board is loaded, push the arms in until they click into place, securing it to your vehicle. To further secure your board, you can attach bow and stern straps from your SUP to the front and rear of your vehicle (sold separately).
![><img class=]()
If your vehicle doesn't have any tie-down points, you can get an anchor kit (sold separately), which will let you create anchor points for bow and stern straps in the creases of your vehicle's hood and hatch.
Built-In Security![Ratchet Arms]()
LockRack carriers have security built-in with locks in the base of the carrier, securing the ratcheting arms. Once you've locked your SUP in the carrier by pushing the arms tight against your board, the arms will stay locked until you remove them with a key.
![Replacement Key Number]()
This carrier comes with 4 identical keys. Once the arms are locked in place, insert a key into the locking mechanism in the carrier base. Rotate the key to unlock and release the ratcheting arms. If you ever need a replacement key (sold separately) you'll need to know your original key number. This number is not located anywhere on the carrier so be sure to make note of the numbers printed on the inside of the original set of keys.
LR47FR Lock Rack Adjustable Expandable Single Stand Up Paddle Board Carrier - Channel Mount
Installation Details 
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.