Unfortunately it will not Bill but congrats on the car! There's been two generation changes with big redesigns on the Corolla so the older hitch isn't going to be transferable. To add a hitch to your 2025 Toyota Corolla LE, I recommend the…
If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…
The Replacement Drop Leg #TJD-5000-FT is designed to be used with Ram TJD-5000 Series jacks so if that's what you have it will work for you. You can also compare the dimensions of this leg with your current one to see if they are equal. This…
Hi Jeff; can you send me a picture of the coupler on the ball? I'm assuming this is a 2" ball on your ball mount. It sounds like it is really close but difficult to say with just a description. With the Drop-N-Go coupler mechanism you should…
Hi Morgan! The tube on the Dutton-Lainson Replacement Jack Foot #DL22542 is the exact same as the tube on the etrailer Round A-Frame Trailer Jack - Sidewind - 15-5/8" Travel - 5,000 lbs #TJA-5000S-B, so it will not be a fit, unfortunately. That…
Hey Curtis, yes you can use the Correct track alignment systems with the Lippert Road Armor equalizers like the part #LC53CK that you referenced. Are you running a 2-1/4 inch or 1-1/4 inch lift from the Correct track?
I would be happy to help. The correct replacement return spring for the jack feet on your 10,000lb side wind jack will be dependent on which brand it is. For example if you have an etrailer or Ram branded jack such as the #TJD-12000SP-F2 then you…
The return spring inside the Bulldog Square Jacks like part #BD182800 are neither replaceable nor repairable according to Bulldog. Therefore, so you will have to replace the entire jack if yours is broken or damaged.
Hello Reed, thanks for reaching out. I am not seeing we offer a square tube jack leg that meets those exact specifications. The longest leg we have that is rated for 7K or more is the Replacement Drop Leg for Bulldog Square Trailer Jacks #BD500270…
Yes, drop leg #TJD-5000-FT will fit trailer jack #MJSQ-2500B. The drop leg that comes with this jack is 1-3/4 inches square which is the same as #TJD-5000-FT. And it has the same hole spacing.
The Trailer Hub Assembly for 3,500 lb Axles, #84550BX, was confirmed by Dexter to be the assembly which replaced part 8-208, but please note that it does have a 5 on 5 bolt pattern, and you mentioned yours was a 5 on 4.5. To determine which bolt…
Filters
