Availability Of Square Tube Jack Leg 7,000 lb Rated And 25" Long

Updated 08/22/2025 | Published 08/17/2025

Products Featured in This Question

Replacement Drop Leg with Foot for etrailer and Ram Square, Direct Weld Jacks - 7,000 lbs

(73)

$37.35

Replacement Drop Leg for Bulldog Square Trailer Jacks - 18" - 8,000 lbs

(34)

$66.74

Fulton Square Drop Leg for Stabilizer Jack, 29" Long

(34)

$48.94

Question:

I need a square tube jack leg with pin that’s 7000lb like this part TJD-7000-FT But I need it to be about 25” long to be used for the stabilizer jacks at the back of my dump trailer I don’t see anything like it anywhere

asked by: Reed E

Expert Reply:

Hello Reed, thanks for reaching out. I am not seeing we offer a square tube jack leg that meets those exact specifications. The longest leg we have that is rated for 7K or more is the Replacement Drop Leg for Bulldog Square Trailer Jacks # BD500270 which is 18" long and rated for 8,000 lbs.

Basically as the legs get longer the weight rating goes down. Like the Fulton Square Drop Leg for Stabilizer Jack # FSJ20324. This is 29" long but rated for only 3,000 lbs.

Those would be the closest we have to what you are looking for.

expert reply by: Jesse M

Reed E.

8/22/2025

What’s your longest for one that is at least rated for 5000lb ?

Jesse M.

8/22/2025

@ReedE That would be the Bulldog # BD500270. 18" long 8K rated. Everything I am seeing that is longer than that is not rated high enough only like 3K. We do have some other higher rated stabilizers if that is what you are needing. Take a look at this : - Ultra-Fab Stackable Stabilizers for Small Trailers and Campers - 6,000 lbs - Qty 4 # UF48-979004