Search: l68111   >  

The DICO Model 10 that you have is essentially the exact same thing as the Titan Brake Actuator #T1607500 that you referenced. This would be an exact replacement.

To replace your NOK AD2527E seal you can use #168233. It has an inner diameter of 1.688 inches and an outer diameter of 2.332 inches. Based on what I could find on the NOK AD2527E the inner diameter is the same and the outer diameter is 2.328…

Torque specs for wheel lug nuts vary depending on several factors like stud size, wheel size and wheel material. The linked image provides a listing of commonly recommended torque values. The studs on your hubs #A35RS545E are 1/2-inch diameter and…

I was able to cross reference the Dexter part number 031-17-02 to a #14125A bearing and part 031-030-02 to a #25580 bearing, and we do have these replacement parts with a grease seal in a complete kit for you. For a replacement bearing/race/seal kit,…

Your existing Atwood model 83010 Brake Actuator (which as you mentioned is no longer available) is an 8,000 pound rated assembly for hydraulic drum brakes that's compatible with a 2" ball. It's designed to fit 3" wide straight…

The Demco Hydraulic Brake Actuator part #DM72VR is a great option to replace an Atwood 82543. That said, it does not come with any sort of reverse lockout feature therefore in order to reverse without the brakes locking up you will either need to add…

Dexter recommends a SAE 90, SAE 80W-90 or SAE 75W-90 oil to be used. I recommend the Kodiak Synthetic Bearing Oil for Oil Bath Hubs #XLPROLUBE as it is a synthetic 90 weight oil that helps reduce friction and to keep bearings cool. Since your cap was…

Yes, for Dexter part number K08-247-1G you'll need the Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased #84546UC3-EZ.

The widest tire size that fits a 12 inch wheel is the 145/80-12 like the part #AM10140 which has a section width of 5.7 inches. This will be right at an inch wider than what you currently have.

In order to find a replacement you will have to identify what you currently have on the trailer. Since you mentioned the rotor I'm assuming you have disc brakes. If you have an over-the-hub rotor you won't need to replace the entire hub, just…

The Kodiak 10" Hub-and-Rotor Assembly #KHR10D matches the TDE 46245 that you currently have. The hub has a disc rotor and 5 on 4-1/2" bolt pattern. The Hub Bearing Kit #BK2-100 contains the races, bearings and grease seal for you to be able…

I did some looking and found that the 46210 and 46845 hubs you currently have use the same #L68149 inner bearing and #L44649 outer bearing. However, as we do not carry the Tie Down Engineering Vortex hubs, I cannot say what all will fit them,…