Can I Convert My Hub and Rotor on My Kodiak Disc Brakes to Idler Hub and Slip-On Rotor?

Updated 07/21/2025 | Published 07/11/2025

Products Featured in This Question

Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Stainless Steel

(48)

$222.85

Kodiak 10" Rotor - 5 on 4-1/2 - Stainless Steel - 3,500 lbs

(32)

$331.19

Question:

Hello, I have a question about trailer brakes. I currently have disk brakes, the kodiak 225 ss. I have the rotor with the integrated hub. I would like to convert to an idler hub and the slip on rotor. Will this work for me to exchange? Thanks.

asked by: Eric

Expert Reply:

Hello Eric,

Yes, you will be able to convert from a hub and rotor setup to an idler hub with a slip-on rotor.

If your axle is rated for 3,500 pounds and has a 5 on 4-1/2" bolt pattern, you'll want the # KH84545S for the idler hub and # KR10S for the slip-on rotor. I stayed with stainless steel components to match your stainless steel caliper.

If your axle is rated for something other than 3,500 pounds, or if you’d prefer non-stainless options, just let me know.

What kind of trailer is this going on?

expert reply by: Kate F