Is There a 90 Degree Adapter for the Kodiak Hydraulic Brake Hose

Question

Question:

Hi there, I need a 90 degree fitting that will attach to this hose and my kodiak disc brakes. Please advise

asked by: Ed

0

Expert Reply:

The Kodiak Elbow Fitting for Hydraulic Brake Hose part # BH-L-3FIF will work with the Kodiak Hydraulic Brake Hose part # bh-3mfs-7. The Kodiak Hydraulic Brake Hose part # bh-3mfs90-1-5 could then be used to attach to the caliper or you could exclude this and the elbow and just use the Kodiak Hydraulic Brake Hose part # bh-3mfs90ff-1-5.

expert reply by: Conner L

0

Answer 1

On a 7 pin round which is the common connection on a semi trailer, the clearance/marker lights are at the 10 o clock position when you look at the trailer wiring connection. When looking at the connector on the back of the truck, that will put the…

view full answer...

Answer 2

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 3

We don't carry the 2x2 inch square axle in that length. We carry the Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs #T3584F-EZ-8974 which is the comparable round axle which will work just fine. You simply will use the…

view full answer...

Answer 4

The rubber section of the brake hose part #BH-3MFS-3-5 is .411 inches or 27/64 of an inch.

view full answer...

Answer 5

Having the slightly larger main feed line of 1/4 inch is a a great idea for plumbing up your triple axle trailer. We have the HydraStar kit part #HS496-153 which is designed for that. This kit uses 1/4 for the main feed line to the first tee fitting…

view full answer...

Answer 6

When selecting ramp springs for a trailer ramp, you will want to know the diameter of your hinge pin and how much space you have available in the hinge. A typical horse trailer or utility trailer ramp uses 3/4 inch hinge pins and would require two…

view full answer...

Answer 7

The best replacement option we offer for a Atwood GC10A-4E Water Heater is tankless, the Furrion RV Tankless Water Heater part #FR68SR. It won't be a direct replacement but still pretty easy nonetheless as they are very similar. That said, you…

view full answer...

Is There a 90 Degree Adapter for the Kodiak Hydraulic Brake Hose

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching