Result: equalizer 1400

Sometimes just use of new spring bars can update a weight distribution hitch to match the tongue weight (TW) of a new trailer, but in the case of your Equal-I-zer system, part #EQ37140ET, the highest-rated bars are the 1400-lb set #EQ90-01-1499 that…

The trailer weight a 2016 Ford F-150 with a 5.0 liter engine can tow ranges from 8,300 lbs to 11,000 lbs depending on rear end gear size and bed/cab length. Basically as long as your rear end gears are 3.73 you are definitely fine, if they are 3.55…

I did some checking and basically the cutout bumper is the regular factory bumper. The Curt hitch, #C15312, will fit up tighter and a little more recessed, apparently the same way the factory hitch does if it were installed. Some people like the…

The B and W trailer hitch #BWHDRH25189 for the 2002 GMC Sierra is indeed rated for use with weight distribution. We are in the process of updating the information but if you look in the specs section of the product page you will see that you can use…

In regards to the B&W Heavy-Duty Trailer Hitch Receiver part #BWHDRH25189, the distance from the flange to the top of the receiver tube is 3-1/8" and the distance from the rearmost mounting hole to the end of the receiver tube is…

The Curt weight distribution shank part #C17123 that you referenced is confirmed to fit with Equalizer weight distribution systems. It will work with the 14k Equalizer part #EQ37141ET you are interested in which can be used with a hitch reducer.

The highest weight capacity available for a 15 inch wheel with a 6 on 5-/12 inch bolt pattern is 2,830 lbs. You will need to use a 16 inch wheel with a 6 on 5-1/2 inch bolt pattern to get a wheel that has a 3,000-lb or higher weight capacity. I have…

The difference between the standard and underslung B&W Continuum Weight Distribution System is the coupler style they are designed for. If you have a standard coupler like the #CA-5400-B mounted to the top of your frame then you need the standard…

There area few differences between the 1,200 and 1,400 pound Equal-I-zer systems. The heads are different and the spring bars are different. If your tongue weight is over 1,200 pound then the 1,200 pound system is not rated high enough. When…

The Curt #C13900 is width adjustable, determined by where the bolts are installed in the crossbar of the hitch. If the hitch is assembled in its narrowest orientation as explained on page 3 of the linked instructions, it'll fit on frames that are…

For your Ice Castle Fish House, the weight of the unit will determine what Equal-I-zer system will work best. A weight distribution system is based on the total tongue weight of the loaded trailer along with any cargo weight behind the rear axle of…

The outer tube of a jack is usually measured in diameter. The diameter of the Dutton-Lainson A-Frame Trailer Jack, #DL22530, is 2 inches. If you take the diameter and multiply it by pi to get the circumference, it ends up being 6.28 inches. You would…