Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Yes, it does! The center of the king pin of a 5th wheel trailer needs to be centered over the rear axle. If you had the hitch and the pin weight behind the rear axle you would unload the front axle and make braking and handling dangerous. The Demco…
view full answer...When it comes to picking out a 14,000 pound weight distribution system with a 2-1/2 inch shank, I recommend The Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 16,000 pounds GTW, 1,600 pounds TW #EQ64FR. This weight distribution…
view full answer...Hi David; you're on the right track with the tongue weight. The tongue weight capacity of your tow vehicle doesn't play a role in choosing a weight distribution hitch (WDH) aside from knowing your vehicle limitations. For a WDH you want to…
view full answer...The proper replacement inner assembly member for your UFP 34043 would be indeed be the the Dexter #DX99FR which is compatible with disc brakes. The replacement has an electric lock out and has a 7500K capacity and is intended to work with a 2 inch…
view full answer...The lid of the Bright Way Trailer Breakaway ICU Kit with 12V, 5-Amp-Hour Battery, Charger, and Wire Loom #BW94FR that you referenced has a wiring diagram shown that details how it wires. Not seen is there is a single wire that runs up to running…
view full answer...Replacement spring bar for 1000 pound Equal-I-Zer systems #EQ90-02-1099 is 36 inches long and 1-3/8 inches wide. The different Equal-I-Zer systems have different heads for the different spring bars so as long as you currently have the 1000 pound…
view full answer...Hello Ryan, thanks for reaching out. If your tongue weight is 1,000 lbs you can go ahead and use your 14,000 lbs Equal-i-zer system #EQ37140ET. This is intended for trailers with a tongue weight between 1,000 and 1,400 lbs, so as long as your are…
view full answer...There is a noise reduction lubricant available, the Equal-i-zer High-Performance Lubricant #EQ91-00-4250. This is designed to reduce the noise of their weight distribution systems, though you are correct that using the lubricant on the sway control…
view full answer...While Reese does not offer replacement spring bar retainers for their Weight Distribution Hitch 49912 #RE94FR, I do know some have used the Curt Spring Bar Retainer #17109 to replace them. These have a very similar design to hold the retainer pin in…
view full answer...The Replacement Spring Bar for Equal-i-zer Weight Distribution Systems #EQ90-02-0699 could potentially work however without knowing what system you currently have I won't be able to say for certain. The easiest way to find out what you need is to…
view full answer...We do have a weight distribution solution that will work well on your 2017 Somerset Evolution E3 w/ Deck but due to the limited clearance on the trailer frame where the chain hangers would attach you'd have to go with a set of bolt on weight…
view full answer...We aren't manufacturers of those parts, and we don't have the testing ability in house, so I reached out to a couple of our manufacturers to see what information they could provide to try and help. I reached out to my contact at Curt…
view full answer...Related Searches