Search: b   >  

Hey Michael; for the newer generation 2500HD I recommend going with the 7 inch drop Tow & Stow: - B&W Tow & Stow 2-Ball Mount - 2" Hitch - 7" Drop, 7-1/2" Rise #BWTS10040B

The biggest difference between the servo styles that you'll notice is between free backing plates and the others. The free-backing plates will allow your trailer to back up without having the brakes lock up. With surge brakes typically when…

The air bag kit I recommend for a 2020 Ford F-350 Dually FX4 is the Firestone Ride-Rite Air Helper Springs part #F35FV. I recommend Firestone over Air Lift as the air bags have a better construction (crimp rolled vs band clamp) and the kits have…

I recommend the Firestone Ride-Rite Air Helper Springs part #F35FV which are designed to fit the 2020 Ford F-350 Super Duty Dually 4-Wheel Drive. The Firestone air bags are durable and created from 4 layers of rubber construction so they are less…

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

We sure can! The Transcom #TCM 21344 TB cross references to the 10-10 seal we offer, part #RG06-090. The seal has a 2.125 inch ID and a 3.376 OD. It's compatible with a 25580 inner bearing.

The B&W Companion 5th Wheel Trailer Hitch #BWRVK3500 (RVK3500) is the complete 5th wheel hitch that will mount to an existing B&W Turnoverball Gooseneck Hitch socket in the truck bed. The part #BWRVB3500 (RVB3500) that you also referenced is…

If you already have brake drums you will not have to replace them unless they are damaged or became overheated and have discoloration on the inside armature surface where the magnet rides, grooves in the armature surface, or severe wear where the…

On Dexter 12" Nev-R-Adjust Electric Brake Assembly #23-458 the shoe pad thickness is 3/16 of an inch. Dexter says that you should replace the shoes if the material gets down to 1/16 of an inch thick or less.

In regards to the Curt Trailer Hitch Receiver part #13322 which is a fit for your 2006 GMC Sierra 1500, the bolts that are used to secure the trailer hitch to the bumper are M14-2 x 40mm hex bolts. Therefore, the weld nuts inside the bumper are…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The Curt Safety Chain Loops #C60691 are the loops which will fit your 2023 Ford F-350 with the OEM puck system. This will allow you to connect your safety chains when using the Gen-Y Hitch Gooseneck Trailer Hitch #GY43XR.