Search: Winch   >   Backup Camera   >  

The size winch that you will need depends on a couple of different factors. I have included part of our hand winch FAQ below regarding boat winches and have linked the FAQ article for you to view. Finding the Right Capacity Winch for your Boat…

I attached a picture of how the Draw Tite front hitch part #65063 installs and it uses the tow hooks to bolt through the mounting plate of the hitch to the truck frame. Since you have the area available where the tow hooks install I'd…

Hey Charles! The Buyers Products Trailer Hand Winch #337HW800S base measures 4-3/4" x 3-1/4" (see attached).

We do have hitches that will fit your 1996 Ford F-450, but the Curt Trailer Hitch Receiver #C15845 you referenced is not a confirmed fit.There are 3 options for your f-450 Cab and Chassis, a 2" receiver tube, 2 1/2" receiver tube and Pintle…

As you have a Solera Edge awning on your 2022 Forest River Cherokee you will have to replace the entire awning to be able to use a Solera Screen Room #LC362218 or Solera Family Room #LC362230. The arms you have are specific to the Edge awning so you…

Yes, the Malone MicroSport to LowBed Trailer Conversion Support Tubes #MAL33TR will allow you to transform your MicroSport Trailer #MPG461B2 into the LowBed #MAL25FR. This will make it much easier to load your kayaks or possibly we launch them…

The Bulldog Winch Trailer Winch #BDW10039 is 24" long x 7-1/4" wide x 7-1/4" tall so it will have no issues fitting on your recessed plate on your trailer. The winch includes a mounting plate that is 20" long and 7-3/8" wide.…

I reached out to my contact at Dexter Axle who said that your axle is rated for 3,500 lbs and it uses inner bearing #L68149, outer bearing #L44649, and the grease seal #58846. All of these can be found in the kit #BK2-100 if you are needing to…

We have the perfect winch for you to pull your 3,000 lb car onto your trailer, the ComeUp UW-5000si Trailer Winch #CU645010. This 5,000 lb static load/50,000 lb rolling load winch has a wireless remote (which is also waterproof) that will let you…

The base of the Fulton winch part #F142007 is 6 inches long and 3-3/4 inches wide.

There's a few differences. • The Curt #C31017 is manufactured in the US, while the Draw-Tite #65046 is manufactured in Mexico. • When installed, the Curt hitch will sit higher on the vehicle for more ground clearance. The underside of the…

I have a recommendation for you as the Bulldog Winch Hitch Mount Storage Bracket #BDW20154 is only designed to hold a winch when not in use. It does not have the structure required to operate a winch. For a 12,000LB Winch #BDW10040 you will need a…