Rear View Safety Rear View Mirror with Monitor - 4.3" Display

See what our Experts say about this Rear View Safety Backup Camera

• Troubleshooting Why The Rear View Safety Rear View Mirror # RVS-718 Shows Everything Backwards
  After installing The Rear View Safety Rear View Mirror with Monitor # RVS-718, per the manufacturer they state that there is more then likely a possible short within the camera. They recommend to check all the connections such as the ground, and make sure that they're all secured. If that checks out try taking out the camera plug, and plugging it into a different camera port to see if you get the same effect on a different channel. If you're still having problems reach back out to me...
  view full answer...
• Does Rear View Safety Rear View Mirror With Monitor Have a Microphone
  The Rear View Safety Rear View Mirror with Monitor for Dodge Vehicles # RVS-718-DODGE does not have a microphone that can be used with Dodge UConnect. This mirror is compatible with Dodge Ram models from 2013-2018. I have added a link to the installation manual for you to check out.
  view full answer...
• What is the Front Sensor for on the Rear View Safety Rear View Mirror Part # RVS-718-DODGE
  The hole on the front face of the Rear View Safety Rear View Mirror part # RVS-718-DODGE below the white tag (see photo) is a sensor for the auto dimming feature. However, please keep in mind that you will not gain this feature if the factory rear view mirror did not already have this but it will allow you to retain it if equipped.
  view full answer...
  
• Trouble Shooting A Rear View Safety Tailgate Handle Backup Camera With Monitor
  You are correct. One of the reasons the Rear View Safety Tailgate Handle Backup Camera and Rear View Mirror with Monitor, part # RVS-718-TAILGATE, is sealed is to keep out any condensation or water of any type. Here are some trouble shooting steps. 1. I am guessing that you have already tried to clean the lens with a microfiber cloth, if not, that is the first thing I would do, 2. I would remove the moisture from the camera with some sort of desiccant. In a pinch, rice does work. You...
  view full answer...
• Will Rear View Safety Tailgate Handle Backup Camera # RVS-718-TAILGATE Fit 1999 Toyota Tacoma
  Due to the universal design of the Rear View Safety Tailgate Handle Backup Camera # RVS-718-TAILGATE it will fit your 1999 Toyota Tacoma extended cab.
  view full answer...
• Installing Rearview Backup Camera System on 2007 Hummer H3
  The Replacement Mirror # RVS-718DOS that you referenced is designed to replace the mirror included with the full Rear View Safety G-Series Backup Camera System # RVS-776718. If you don't yet have a camera system at all on the Hummer you will want to go with the full system, which includes everything you will need. The rearview camera/mirror will fit in the same spot as the OEM mirror in your Hummer but the wiring won't be exactly the same. You will just need to follow the wiring instructions,...
  view full answer...
• Backup Camera Recommendations for Back of Fifth Wheel Trailer
  I have a few options I recommend for use on an RV or Truck application. That being said I strongly recommend a wired system since they are much more consistent and you never have to worry about interference which is a common complaint with wireless systems. I recommend the Rear View Safety Backup Camera System with Trailer Tow Quick Connect Kit - 2 Cameras, # RVS-776614-213. This is a completely wired system with a 7 inch monitor with grid lines. It will automatically switch between the...
  view full answer...
• Troubleshooting RVS Mirror with Monitor for Dodge Vehicles RVS-718-DODGE
  The wiring connections for the Rear View Safety Rear View Mirror with Monitor for Dodge Vehicles # RVS-718-DODGE include the GREEN trigger wire connecting to the reverse light circuit and the RED 12V power wire to an ignition-controller power source, such as the power antenna circuit which operates when the key is turned on. The BLACK wire is ground and connects to a clean bare metal spot on the chassis. If you have made each of these wiring connections and confirmed that all are solidly...
  view full answer...
• Can Rear View Safety Rear View Mirror with Monitor Attach to Standard Windows
  Yes the Rear View Safety Rear View Mirror with Monitor part # RVS-718-3SC can attach to basically any windshield. It comes with a universal mount system that attaches to the standard window mounts.
  view full answer...
• Tailgate Mounted Back Up Camera System With OEM Appearance for 2006 Chevy Silverado
  The 2010 and 2006 Chevy Silverado are from different generations and would use different tailgates, so you wouldn't be able to swap the two. This being said, we do offer a camera system that would look pretty similar to the OEM systems. I'd recommend the Rear Vies Safety Tailgate Handle Back up Camera system, part # RVS-718-TAILGATE. The small camera would mount to your tailgate handle assembly and the monitor is actually a rear view mirror that would replace the existing mirror mounted...
  view full answer...
• Recommended Rear View Monitor Camera for 2003 Toyota Tacoma
  The best rearview mirror monitor we offer for a 2003 Toyota Tacoma is the Rear View Safety Tailgate Handle Backup Camera and Rear View Mirror with Monitor part # RVS-718-TAILGATE. This will replace you existing rearview mirror and provide you with a mirror and monitor combo. The camera then gets mounted to the tailgate handle like most factory backup cameras are. Unfortunately, these camera systems are designed to be used for backup only so if you wish to use this as an observation system...
  view full answer...
• Replacement Camera for Use with Rear View Safety Display RVS-718
  I spoke with Rear View Safety and they said any of their 5 pin cameras will work. The # RVS-776 is a compatible camera that would work well. It has a very clear image so it would be a big improvement over what you have. It's possible yours maybe had some water in it or is fogged up.
  view full answer...
• Rearview Backup Camera with Dash Cam for Nissan NV 3500
  Rear View Safety Rear View Mirror with Monitor - Built In Dash Camera # RVS-718-BB would be a great choice as it is a rear view mirror display setup that has a dash camera built into it that can accept a 32 gig card. Then for a camera you could use the # RVS-776 and you'd be set.
  view full answer...
• Extension Harness for Use with Rear View Safety Mirror Monitor Setup RVS-718
  For a longer vehicle like your 2012 Mercedes Sprinter 2500 you'd want to an extension harness with the Rear View Safety Rear View Mirror with Monitor # RVS-718 and for that we have the part # RVS-102N which is 16 feet long.
  view full answer...
• Rearview Camera Kit that Could Fit 2002 Chevy Suburban
  I looked up the attachment style of the current third brake light you have on your 2002 Chevy Suburban and it uses a style different from the Rear View Safety Third Brake Light with Camera # RVS-917. The mirror you have has mounting flanges below the light and this has mounting holes that go through the light assembly. So this could probably be made to fit your vehicle but it's up to you if you'd be willing to make the needed modifications to make it happen. We don't have a more likely...
  view full answer...
• Rear View Backup Camera Compatible With Ford Rear View Mirror Plugs
  Unfortunately, there isn't a system compatible with the factory auto dimming mirror from Ford. You can replace the factory mirror, but the wiring will still require running wires and you will unfortunately lose the factory functionality in order to upgrade. The system I recommend is the Rear View Safety G-Series Backup Camera System - Auto Dimming, # RVS-776718-D. Although this doesn't plug into your factory system, you will still have the auto-dimming available to you.
  view full answer...
• Can The Camera For the Hopkins Smart Hitch 50002 Be Separated From The License Plate Frame?
  The Rear View Safety # RVS-718-TAILGATE will likely be a better option for you as the camera on the Hopkins # HM50002 is also wired into the backup sensors. This will not allow you to just remove the camera and use it alone with the monitor. The monitor on the Rear View Safety is built into the rear view mirror so you will not have to have an additional monitor on your dash. It has a small camera which is designed to mount inside a tailgate handle making it easy to position on your vehicle...
  view full answer...
• Front Hitch Recommendation for 1992 Chevy C1500
  For your 1992 Chevy C1500 we have the Curt front hitch part # 31042 that I would recommend as it does not require moving the front license plate bracket like the Draw Tite part # 65005. I would only recommend going with the Draw Tite if you needed the max ground clearance as possible.
  view full answer...
• Can I Keep the Factory Backup Camera When Using 5th Wheel Tailgate on a 2019 Ram 2500
  I do have an option for you but the Stromberg Carlson 4000 Series 5th Wheel Louvered Tailgate part # VGD-10-4000 does not have a spot for the factory backup camera. Therefore you would either need to find a way to mount this yourself, go without, or use a new camera system. For the new system, the best option we have is the Rear View Safety Backup Camera System part # RVS-718-DODGE and part # RVS-778. This system will replace the rear view mirror with a dual purpose mirror/monitor so you...
  view full answer...
  
• Rear View Safety Backup Camera Compatible With 2009 Honda Pilot
  A Rear View Safety Camera will work on your 2009 Honda Pilot, but the tailgate versions # RVS-718-TAILGATE you're looking at is not the one you want to get. This kit # RVS-772718 is a flush mounting kit and will work with your Honda Pilot. If you have on star buttons on your Pilot, you will loose that function so be prepared for that. If you wanted something a bit more simple to set up and able to move around to different vehicles, I would recommend getting the Swift Hitch # SH02Digital...
  view full answer...
• Mirror Mount Wedge, and Cameras that Can be Used with RVS-718-3SC
  Yes the universal mounting pin part # RVS34FR is compatible with the # RVS-718-32C that you referenced. This would also work with the # RVS-775L, # RVS-775R and the # RVS-812N.
  view full answer...
• Tailgate Handle with Backup Camera for a 2015 Toyota Tacoma
  I have the perfect option for you to obtain a locking tailgate handle with backup camera on your 2015 Toyota Tacoma. For this, you will first want to use the Pop & Lock Custom Tailgate Lock with Handle part # PAL8540 which uses the same key as your ignition and doors. It also has the ability to unlock and lock with your key fob. This handle is black but we also have color matched options if you can provide me with the color of your truck. Now, I am not sure if you need a backup camera...
  view full answer...
• Refrigerator Bars for 16" to 28" Spacing
  We have the 16" to 28" refrigerator bars in a few different options for you: - White Double Bar # CAM44073 - White 3-Bars # CAM44053 - Oak 3-Bars # CAM43823
  view full answer...
• Recommended Tailgate Camera For A Pop & Lock Tailgate Handle On A 2005 Toyota Tacoma
  The Rear View Safety Tailgate Handle Backup Camera and Rear View Mirror with Monitor # RVS-718-TAILGATE will mount to the Pop & Lock Custom Tailgate Handle with Lock and Key Alike Lock Cylinder - Manual - Black # PAL5410 you were wanting to install on your 2005 Toyota Tacoma using the Camera Mounting Clip for Pop & Lock Custom Locking Tailgate Handle # PL5455CAMB. This camera system is going to replace your factory rear view mirror and features 170-Degree viewing angle, adjustable grid...
  view full answer...

Do you have a question about this Backup Camera?