GCH Automotive Backup Camera - 3460004

Custom bezel with a built-in night vision camera mounts behind your third brake light. Line up your fifth wheel or gooseneck trailer using the included 7" full-color, LCD monitor.

Features:

• Custom bezel with camera mounts behind your third brake light so you can see into your truck bed
  • Works with included 7" monitor
  • Assists in connecting fifth wheel or gooseneck trailers
  • Only functions while in reverse
• Camera manually adjusts 360-degrees for a perfect angle into your truck bed
  • Gives you a 150-degree viewing angle
• Rear assist marker lines generated by camera show distance from other objects
• 0 Lux night vision produces a quality picture in complete darkness without IR transmitters
• 7" Full-color LCD monitor allows you to adjust brightness, color, contrast, and orientation
  • 2 Video inputs let you toggle from one camera to another (additional camera sold separately)
  • Included remote control allows you to navigate through your monitor's settings
  • Integrated sunshade reduces glare on monitor screen
• Butterfly monitor mount drills into or sticks to your dashboard with included adhesive backing
• Waterproof, aluminum camera resists dust and corrosion
  • IP69-rated to protect against dust and close-range, high-pressure spray downs
• Simple installation - no drilling required
  • Mounts with existing hardware

Specs:

• Camera bezel dimensions: 17-5/8" wide x 4-3/4" tall x 1-5/8" deep
• Bezel mounting hole spacing:
  • Inner: 5-7/8" center to center
  • Outer: 14-3/4" center to center
• Camera diameter: 1-1/2"
• Monitor dimensions: 6-3/4" wide x 4-1/2" tall x 1-5/8" deep
• Screen size: 7"
• Butterfly mount dimensions: 4-3/4" wide x 1-3/4" tall x 3-5/8" deep
• Butterfly mount hole spacing:
  • Horizontally: 3-7/8" center to center
  • Vertically: 3-1/16" center to center
• Resolution:
  • Camera: 620 Lines
  • Monitor: 680 x 234
• Voltage: 12V - 24V DC
• Wiring harness: 24' long
• 3-Year warranty

Rear Assist Lines

The rear assist lines generated by the system's camera make connecting your fifth wheel camper or gooseneck trailer a one-person job. The lines appear on the included 7" monitor and show the distance from other objects, allowing you to accurately line up your connection point when hooking up your camper or trailer.

0 Lux Night Vision

0 Lux night vision produces a quality picture and gives you the flexibility you need when hooking up your camper or trailer. You can line up your connection point in low-light conditions at dusk, or in complete darkness at night without the aid of IR transmitters.

Simple Installation

Simply unscrew and unplug your factory third brake light. Once removed, set your new custom bezel with camera in place. Feed the 6' camera wire through the opening into your truck and re-install your factory third brake light in front of the custom bezel.

Connect your 6' camera wire to the 18' wiring harness. This combined 24" wire will extend through your head liner or door sill panel along the edge of the floor, up to the front of your truck, and connect with the included ground and power wiring harness. The power wire will run to your truck's battery.

17FRDBRK360-MON Truck Bed Camera - Night Vision - 7" Screen

This Product Fits The Following Vehicles

• 2015 - 2023 Ford F-150
• 2017 - 2025 Ford F-250 Super Duty
• 2017 - 2022 Ford F-350 Cab and Chassis
• 2017 - 2025 Ford F-350 Super Duty
• 2017 - 2025 Ford F-450 Super Duty