Swift Hitch Backup Camera - SH03D

Portable, wireless hitch monitoring system uses interference-free digital transmission. Two water-resistant cameras come with magnet mounts and 1 suction cup mount for simple setup. Hand-held monitor has a toggle switch to view from either camera.

Features:

• Hitch alignment system makes it easy to back your tow vehicle up to your trailer for hookup
  • Simplifies lining up hitch ball with coupler
  • Perfect for hitching up goosenecks, fifth wheels, and snowplow blades
  • Can also be used as a backup camera and monitoring device
• 2 Cameras let you see in 2 places
  • Provide 2 views for hooking up your trailer
  • Let you keep an eye on both your 5th-wheel trailer and your towed boat or car
  • Perfect for monitoring horses or livestock in your trailer
• Portable cameras mount wherever you need them and can be easily removed or repositioned
  • Rotating stems let you point the cameras in nearly any direction
  • Magnet mounts and 1 suction cup mount included
• Wireless system is easily transportable from job to job and vehicle to vehicle
  • No permanent installation or wiring required
• Night vision lets you see up to 15' away in the dark
  • Infrared lights are built into the front of each camera
  • Automatically turns on and off in dark or dim lighting
• Hand-held monitor has a 2-1/2", full-color, high-resolution LCD screen
  • Toggle button lets you easily change the view from one camera to the other
  • Mirror-image view displays objects as they would appear in a rearview mirror
  • Optional dash mounting with included hook-and-loop strips (similar to Velcro)
  • Video-out jack and included cable let you transmit images to a recording device
• Water-resistant cameras are made of rustproof aluminum with a UV-resistant, painted exterior
• Rechargeable lithium-ion batteries power the cameras and monitor
  • System works while charging and without being fully charged
  • 12-Volt DC charging cable included
• Extension antenna included
• FCC certified

Specs:

• Digital transmission distance:
  • Camera 1: 200'
  • Camera 3: 300'
• Video-out cable length: 56"
• 12-Volt DC charging cable length: 37"
• 1-Year limited warranty

Cameras:

• Batteries:
  • 10-Hour maximum life when fully charged
  • 4 Hours required to fully charge
• Viewing angle: 55 degrees (horizontal and vertical)
• Imaging sensors: 1/3" CMOS
• Overall dimensions (per camera): 4-3/4" long x 1-1/8" wide x 3" tall
• Magnet mount base dimensions (per camera): 2-1/4" long x 1-5/8" wide
• Distance between mounting holes on base (center to center): 1-9/16"
• Suction cup mount dimensions: 3-1/2" triangular plate with (3) 2-1/2" diameter suction cups
• Weight: 5.7 oz

Monitor:

• Battery:
  • 4-Hour maximum life when fully charged
  • 2.5 Hours required to fully charge (recommended for first-time use)
• Overall dimensions: 3-1/8" wide x 5-1/8" tall x 1-1/4" deep
• LCD screen dimensions: 2-1/2" diagonal (2" wide x 1-9/16" tall)
• Resolution: 960 x 240 dpi
• Weight: 5.5 oz

2-Camera System

This 2-camera system is perfect for a variety of trailering applications in which 2 unique viewing angles are desired. For example, you could keep an eye on the horses inside your trailer. Or you could use the system to monitor your rig when towing a boat behind your fifth-wheel camper. The system is also ideal for agricultural jobs such as monitoring 2 filling silos. Each camera wirelessly transmits video to the hand-held monitor, and the entire system is battery powered - which means no complicated wiring is needed for installation. And, the cameras' place-and-point design lets you reposition them for each job.

Hitch Alignment Made Easy

The 2-camera Swift Hitch aligner doubles your view so you can quickly align your vehicle's hitch ball with your trailer's coupler. It eliminates trailer hookup headaches like getting in and out of your vehicle, relying on a spotter, and accidental collision.

Using the system is easy. Attach one of the cameras to your tailgate or trailer - the magnetic base makes it simple to place the camera wherever you need it - and point it at your hitch ball. Hop in the driver's seat, and use the monitor to watch your progress as you back up your vehicle. No getting out of the truck to check, no deciphering the hand signals of your significant other, and no running out of patience. Once the hitch ball and coupler are aligned, all that's left to do is hookup and hit the road.

For gooseneck and fifth-wheel trailers, attach the camera to the back of your cab for a helpful look into the bed of your truck as you back up to the trailer.

Digital Transmission Without Interference

This system uses digital technology to transmit images from the camera to the monitor. Unlike wireless devices that use analog technology, this camera system does not pick up interference from other devices that use Bluetooth or WiFi. This means that you'll have a crisp, clear image of your hitch every time.

Night Vision Cameras with 10-Hour Battery Life

Each of the cameras has a 10-hour battery life, making them perfect for folks who tow frequently or for those who need to monitor a job for a long period of time and don't want to spend a lot of time recharging the batteries.

Seven infrared lights surround each camera's lens to provide up to 15' of night vision so you can get the job done in the dark. Night vision automatically activates in dim or dark conditions and turns off when lighting improves. When the cameras are using night vision, images are displayed in black and white on the monitor.

Each camera is labeled with a number because they operate on two different channels. Camera 1 operates on channel 1, and camera 3 operates on channel 3. Camera 1 sends images to the monitor from up to 200', away and camera 3 transmits from up to 300' away. Each camera gives you a targeted, 55-degree viewing angle (horizontal and vertical).

Camera 1 comes with two antennas so that you can get optimal reception. The 2-5/8" antenna should be used on camera 1 for most applications where there is little to no obstruction blocking transmission. When camera 1 is obstructed, such as when inside an enclosed trailer, use the included 7-1/2" long extension antenna. You can route the extension antenna from the camera to an unobstructed area using the included 9' cable. The extension antenna has a magnetic base for easy set-up.

The back of each camera has an on/off button, an LED light, and a jack for the charging cable. The LED light changes color to signal when the camera is on (green), when it's charging while the power is on (yellow), and when it's charging while the power is off (red).

Place-and-Point Design

Setting up each camera is as fast as place and point. First, place the camera's strong magnetic base on a metal surface. The magnetic base lets you easily remove and reposition the camera depending on the job - unlike a backup camera that's permanently mounted at the rear of your vehicle. Plus, the base has a smooth, non-scratch nylon backing.

Next, point the camera at your hitch ball or target. A stem with a rotating ball joint sits between the camera and the magnetic base. The stem smoothly rotates 360 degrees, allowing the camera to be pointed in any direction and hold its position.

One suction cup mount is also included (additional mount PM01 - sold separately). This triangular metal plate with 3 suction cups lets you mount the camera to a non-magnetic surface. Simply stick the suction cup mount onto the mounting surface and then place the camera's magnetic base on the plate.

If your application requires you to use the cameras while traveling, such as monitoring horses inside an enclosed trailer, the camera and extension antenna stand should be securely mounted. Pre-drilled holes let you mount the cameras and antenna stand using 1/8" screws or bolts with wing nuts (not included).

Water-Resistant Construction

The Swift Hitch cameras were constructed with water resistance in mind so that you can hitch up in any weather. A sealed plastic barrier on the front of each camera covers the infrared lights to shield them from water, and an attached cap back covers the charging port. The housing hangs over the lens like an awning to protect it from the rain. Plus, the body, stem, and base of each camera are made of durable, rustproof aluminum, and the exterior has a UV-resistant coat of bright yellow paint.

One clear plastic cap is included (additional cap PB04 - sold separately) to protect one camera's rear end from rain or other inclement weather, particularly when the lens is pointed at your hitch ball. The cap fits snugly onto the back of the camera. The on/off button can be pressed while the cap is on, but the cap will have to be removed when you want to plug in the charging cable.

Hand-Held Monitor with Full-Color LCD Screen

The hand-held monitor features a 2-1/2", high-resolution LCD screen that displays crisp, clear full-color pictures (images appear in black and white while camera is operating in night vision). Video is displayed in mirror image by default to give you the same viewpoint as your rearview mirror, but this setting can be switched to non-mirror image if you prefer. The monitor has a battery life of up to 4 hours when fully charged. It is recommended that the monitor battery be fully charged before first use.

To turn the monitor on or off, hold down the button on the front for 3 - 5 seconds. To switch the display from mirror-image view to non-mirror-image view, press the button quickly. An LED indicator light changes color to signal when the monitor is on (green), when it's charging while the power is on (yellow), and when it's charging while the power is off (red). The light flashes when the unit is in the non-mirror-image setting so you know what perspective you've got on the display.

A toggle button located on the side of the monitor lets you quickly change the channel between the 2 cameras. The included video-out cable plugs into the side of the monitor so that you can transfer images to a larger screen or a recording device.

The lightweight, durable plastic unit has a contoured shape so that it is easy to hold in one hand. For dash mounting, two 7/8" hook-and-loop strips (similar to Velcro) with adhesive backing are included. Or you can use the Swift Hitch windshield mount kit (sold separately) to keep the monitor easily within view.

Wireless, Portable System

This portable, completely wireless system is simple to set up and convenient to use. It does not need to be hardwired to your vehicle, nor does it rely on your vehicle's battery to work. Instead, it uses radio frequency to transmit video from the cameras to the monitor and it is powered by rechargeable lithium-ion batteries. There's no permanent installation or drilling required, so the system can go anywhere you go - from the jobsite to the campsite, from your work truck to your SUV.

The included 12-volt DC cable lets you charge the monitor and one of the cameras or both cameras simultaneously. An AC-to-DC adapter (sold separately) can be used to charge the system from a 110-volt AC wall outlet.

SH03D Swift Hitch 10-Hour Back Up Camera System with Color Monitor and Infrared Night Vision - Digital Transmission - Wireless - Battery Powered - 2 Cameras

Replaces SH03

Installation Details