Will The Curt T-Connector C93RV Fit 2025 Toyota Camry With LED Lights?

Question

Question:

Trailer wiring Code: C93RV says Tech Tip: Product not intended for models with LED taillights. Does this mean the taillights on the car or on the trailer?

asked by: Kerry K

0

Expert Reply:

Hello Kerry, thanks for reaching out. That is referring to the taillights on the vehicle. The Curt T-Connector # C93RV will fit the 2025 Camry, but will not work on models with LED lights.

What lights do you have on your Camry?

Please let me know if there is anything else I can do to help.

expert reply by: Jesse M

0

Kerry K.

6/2/2025

I have LED tail lights and have not been able to find a wiring kit that support them.

Jesse M.

6/2/2025

@KerryK Yea sadly there is not a custom fit wiring solution for the 2025 model with LED taillights (yet). I do know that Curt is working on something, but there is no ETA for that yet. Right now the only option would be a universal ZCI harness like the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119251.

Kerry K.

6/2/2025

@JesseM is there a way to be notified when the kit becomes available?

Jesse M.

6/2/2025

@KerryK There would be no way for us to set up automated notifications for that so you best bet would be to just check back with us and look at the site periodically. The fitguide page will be updated once more wiring solutions become available.

See All (5) Replies to Kerry K. ∨

Ct

1/13/2026

I still don't understand why wiring kit says it will fit 2025 Toyota camry. All 2025 Camry have LED lights. Please explain

Jesse M.

1/13/2026

@Ct Typically the tail light bulb type varies with the different trim packages. Lower trims like the base LE typically have incandescent or non-LED rear lights, while higher trims such as XLE and XSE are equipped with full LED tail lights from the factory.

Ct

1/13/2026

@JesseM So does it fit the Camry Se

Jesse M.

1/13/2026

@Ct According to my research the 2025 Camry SE uses incandescent lights and does not come with LED lights as standard. So yes the # C93RV wiring harness will work for that. I actually drive a 2020 Camry SE and its a great car.

See All (9) Replies to Ct ∨

Answer 1

Hello Kim; the #C93RV will likely fit the 2025 Toyota Camry hybrid but we don't have full fitment information since Curt is still developing it. I would check back to see when they release it if it will be compatible with the hybrid models.

view full answer...

Answer 2

Yes, they will Jeff. The etrailer Hitch item #e77ZV fits both the 2025 and 2026 Toyota Camrys. This is a class I hitch with a 1-1/4" receiver that has a 2,000 lbs towing capacity and a maximum tongue weight of 200 lbs. If you're needing a…

view full answer...

Answer 3

Brett, the Curt Trailer Hitch Receiver #C94RV fits all models of the 2025 Toyota Camry so it will fit both the FWD and AWD models.

view full answer...

Answer 4

Curt recommends the use of 250 ft/lbs of torque when tightening the nuts of their hitch balls with a 1 inch diameter shank like the part #C40034 that you referenced. The general rule is for a 3/4" shank tighten to 150 ft/lbs For a 1" shank…

view full answer...

Answer 5

Yes the Yakima Jaylow part #Y04073 that you referenced does fit the bars of the Malone EcoLight Sport Trailer #MAL53FR that you also referenced.

view full answer...

Answer 6

Hey Ronald, thanks for reaching out! If you remove the round bar adapters from the Yakima JayLow #Y04073 and SweetRoll #Y04074 then they should be able to fit your 1-1/8" square Malon crossbars. Have you tried it yet?

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 11

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Will The Curt T-Connector C93RV Fit 2025 Toyota Camry With LED Lights?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching