Installation of Redarc BCDC1225D with Redarc RK1260- Blue Wire Location
Updated 08/23/2025 | Published 06/08/2021
Products Featured in This Question
Question:
I will be installing this Redarc battery charger on a 2020 Ram 2500 Power Wagon. I believe that the truck probably has a smart alternator but will not see it until next week. Can you confirm? Also, assuming it does, can you tell me which fuse to run the blue wire of the Redarc RK1260 relay kit to? The truck will be towing a travel trailer with dual 12v AGM batteries and want to charge them while towing. Thanks for your help..
asked by: Marc
Expert Reply:
If you're installing the RedArc BCDC # 331-BCDC1225D using the 60-Amp Relay Kit for Redarc In-Vehicle BCDC Battery Charger # 331-RK1260 you will connect the relay to the vehicle ignition. I've also linked the wiring diagram for this installation for you to use as a guide.
(click to enlarge)
Product Page this Question was Asked From
Redarc In-Vehicle BCDC Battery Charger - Dual Input - DC to DC - 12V/24V - 25 Amp
- Battery Charger
- Battery Charger
- RV/Camper
- Trailer
- 12V
- Charges and Maintains
- AGM
- Calcium
- Gel
- Lead Acid
- Lithium
- Solar Panels to Auxiliary Battery
- Vehicle Battery to Auxiliary Battery
- Smart Charge
- Trickle Charge
- Redarc
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: connector
- Search Results: trailer wiring
- Search Results: 5th wheel gooseneck adapter
- Search Results: relay
- Search Results: ring terminal
- Search Results: trailer connector
- Video: The Low-Down on the 2-Pole Socket Connector
- Shop: 60-Amp Relay Kit for Redarc In-Vehicle BCDC Battery Charger
- Search Results: 20110
- Shop: Mighty Cord 5th Wheel/Gooseneck Wiring Harness w/ 7-Pole Connector - 7' Long
- Shop: Gooseneck to 5th Wheel Trailer Coupler Adapter - Inner Tube - Round - 25K lbs
- Q&A: What Gauge Wire Should be Used with Redarc In-Vehicle BCDC Battery Charger
- Q&A: How Does Pollack 2-Pole Connector # PK12801 Attach to Wires
- Q&A: Wire Gauge Required for Redarc 60-Amp Relay Kit
- Q&A: What Are the Dimensions of the Pollack 12801 2-Pole Socket Connector
- Shop: 2-Pole Trailer Wiring Connector - Trailer Side
- Shop: Roadmaster Brake-Lite Relay Kit for Towed Vehicles
- Shop: 2-Pole Socket Connector - Vehicle Side
- Shop: Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector and Cover Plate - 7' Long
- Video: Mighty Cord 5th Wheel and Gooseneck Wiring Harness Installation - 2023 Chevrolet Silverado 2500
- Q&A: Will Truck Bed Camper Tie-Downs Interfere With Opening The Fuel Door On A 2022 F-250/F-350
- Video: Review of the EZ Connector Magnetic 7-Way Trailer Connectors w/ Watertight Seal
- Video: An In-Depth Look at the Pollak Metal 7-Pole, RV-Style Trailer Connector
- Q&A: Recommended In Bed 7-Way Connector for a 2024 Chevy Silverado 2500
- Q&A: What Gauge Is the Wiring on the RedArc BCDC Charger
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Article: Trailer Wiring Diagrams
- Video: An In-Depth Look at the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: An In-Depth Look at the Roadmaster Battery Charge Line Kit for Towed Vehicles
on Battery Charger
John J.
8/23/2025
Hi Erik I have a dc-dc charger In my camping trailer pulled by my f150 with smart alternator. Not ignition wired atm I have a 1260 relay pkg on order but I do not understand how the blue ignition connection on the trailer installed dc-dc charger will be connected through to the relay that will be installed in my truck? What am I missing? Thanks in advance