Customers compare STL68RP5B to these similar products
Products Featured in this Video
Today we're going to be taking a look at the Optronics trailer tail light with backup light, part number STL68RB. Here in the back of our trailer you can see we're going to be upgrading our lights to a bigger light with the backup light. It features 14 LEDs in a red and clear lens, and because it's LEDs its going to be more efficient, there are not bulbs to replace, and it's going to last a long… see more >
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Yes, the Optronics Mini Thin Line LED Marker/Clearance Light #AL191AB can be flush-mounted using the Optronics Flush Mount Grommet #A91GB. This PVC grommet will provide a degree of shock protection for the installed light and its rear opening allows…
view full answer...The Dexter Electric Trailer Brake Assembly #23-429 & #23-428 have a center opening of 3-7/8" for fitting on the axle tube. It will mount to bolt holes that are 3-5/8" spread left to right and 4-3/8" top to bottom. I have included…
view full answer...The magnets you have been using with the yellow wires should be the correct units for your Dexter 12-1/4 x 4 inch shoes. When replacing them I recommend sticking with the same assemblies. The Replacement Magnet Kit (with yellow wires) #BP01-301 that…
view full answer...Brake magnets are made to fit their specific brake assemblies. They are not made to be interchangeable between brake sizes or weight capacities. Some manufacturers do use different color magnet wires that correspond to the capacity. We know that…
view full answer...The Replacement Trailer Brake Magnet for 12" Brake Assemblies #BP01-180 will fit old Hayes AL-KO brake Assemblies that are 12x2 inches. They fit 6K and 7K assemblies after 1988. For the 7.2K and 8K oval you would want the Trailer Brake Magnet…
view full answer...Actually on brake magnets for trailers either wire can be used as the power or the ground so the colors don't really mean anything. Most likely the magnet manufacturer just put what ever color was most convenient on your trailer.
view full answer...I would be happy to help! The Fusion LED Trailer Tail Light - Stop, Tail, Turn, Backup - Submersible - Oval - Red/Clear Lens #STL68RP5B you were looking at is sold in a quantity of one, so if you are needing two tail lights you will need to order a…
view full answer...You should have 3 wires at the rear of your LED light, or from a pigtail like part #A47PB, that plugs into a light like part #STL22RB. The red wire will be connected to your stop/turn circuit on your vehicle. The black wire is spliced into your…
view full answer...That is the only way you'd be able to install the Tekonsha Prodigy P3 Trailer Brake Controller #90195 on your 2023 Ford Transit T350 since there is no custom fit wiring harness. To install this, you'll first need to find the cold side of the…
view full answer...The distance between the mounting holes on the Pollak 7- and 4-Pole Trailer Connector Socket with Mounting Bracket, #HM40975, measures 2 inches to 2-3/4 inches. I have attached a picture to illustrate these measurements. Two, 5/16 inch self tapping…
view full answer...I think the part #STL68RB would be perfect for your flatbed truck (looks good by the way). The dimensions of the this oval light are 10 inches long and 3 inches tall. They do stop/turn/tail/reverse light functions as well so you would be totally set.…
view full answer...There is a size difference between the brake assemblies that fit 7k axles and 8k axles so you would not be able to use 7k assemblies on an 8k axle. You'll have to measure your current assemblies do determine which kit you'd need:…
view full answer...