Hey Ed, yes the solenoid of the reverse lock out is going to click when it is activated. You would definitely be able to hear it too. Have you tried this already?
Hi Pedro; nothing comes back under that part number. Based on the information you provided I'm guessing you need the Dexter Electric Trailer Brakes - 12" - Left/Right Hand - 6K AL-KO/Hayes Axles #23-105-106-09. These are 12" x 2"…
The Plug-In Wiring Harness #3064-P that you referenced is the correct brake controller harness for your 2019 Chevy Silverado 1500 and it is actually a brand new product for this generation of GM trucks (it currently only fits the 2019 model Silverado…
I have a few options for you to consider, but I do not have the exact specs of the safety chain loops on your Touareg so you would need to pick from the following to see which would be the best solution. We have Clevis hooks in various diameters that…
Hello Mike, Your old brake actuator only had one wire because it grounded through the trailer frame, which was pretty common back in the day. Your new Dexter DX7.5L actuator #DX89FR has two wires coming off the electric lockout solenoid no worries,…
There are only 3 real possibilities for your lockout failing to work properly on the #DX29FR. The first would be the power. Since it sounds like you are getting 12V power to the solenoid it doesn't sound like this is the issue. The second would…
Assuming that when you tested the resistance of the brakes you were testing the two wires on each magnet and getting 2.0 and 2.8 ohms the magnets on your trailer are not working correctly and will need to be replaced. For 7" brakes you should…
Yes, you can use 4-leaf springs in place of 3 leaf springs. The extra height of an additional leaf is minimal and won't really affect anything on the trailer. Provided that the springs used are replaced in pairs and not just one side of the…
Hi Mark; are you saying these are double eye leaf springs? All double eye are 1-3/4" wide so I would double check that measurement. I will also need to know the axle capacity to see if we have leaf springs that match. The bushings sound like the…
I would be happy to help you find the correct replacement springs for your Continental AWC11e Trailer, but unfortunately we do not have a break down of the specific components your trailer uses. To determine the correct replacement spring you will…
Spring Hanger location dimensions are normally figured by the manufacturer and provided with the spring hanger kit, that includes all of the parts for installing the springs on the trailer frame. I have provided a chart that shows the spring hanger…
Thank you for the photo of your horse trailer's oval clearance light lens. The lens markings are actually DOT references (not part numbers) but we can still help. Light part numbers are usually found on the base portion, not the lens, as shown on…
Filters
