This 3-Wire, Y-adapter harness allows you to install 2 Peterson lights using an existing 3-prong trailer wiring harness. Harness has 2 male PL-3plugs and 1 female PL-3plug.Features: Y-adapter harness allows you to install 2 Peterson lights using an existing 3-prong trailer wiring harness Designed specifically for use with stop/tail/turn lights, parking/turn lights
Connect your RV's 30-amp power plug to a 30-amp twist-lock receptacle on a generator with this round adapter. 3-Prong twist-lock design keeps the plug from disconnecting as your generator ... twist-lock generator receptacle Twist-lock design on male side keeps the connector from vibrating loose when it's plugged into the generator 3Prongs for L5-30 locking plug receptacle Yellow adapter
This 3-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Optronics light. Right-angle plug allows wires to run down from light instead of straight out ... Features: Pigtail with 3-prongplug allows you to wire your Optronics light to your trailer Designed specifically for use with Optronics stop/tail/turn lights, parking/turn lights, and warning lights
Plug this adapter into a 50-amp electrical hookup to convert to (2) 30-amp connectors for you RV's power cords. 90-Degree plugs with built-in handles are easy to plug in, disconnect, and fit ... Features: Adapter lets you plug (2) 30-amp power cords into a 50-amp electrical hookup 4-Prong, male plug connects to the 50-amp outlet on an electrical box 3-Prong, female plugs give you (2) 30-amp
Cam-door style lock is ideal for use on trailer side doors that may be smaller than rear doors. Features 45" long pipe and rust- and corrosion-resistant zinc coating.
... with grommet. Accepts included standard 3-prongplugs. grommets Includes industry-standard 3-prongplugs for connections Specs: Quantity: 2 trailer tail lights Overall dimensions: 7-9/16" long x 3-5/16" tall x 1-3/4" thick Light face: 6-1/2"
2-Wire pigtail has a male plug on one end that pairs with the female connection on your Optronics light. Right-angle plug allows wires to run down from light instead of straight out the back ... Features: Pigtail with 2-prongplug allows you to wire your Optronics light to your trailer Designed specifically for use with Optronics side marker, clearance, and utility lights Right-angle design
Get a clean, factory look for your car when it's not being towed by using these invisible base plates. Tabs remain on tow bar arms and easily secure to base plate receivers with a quick turn. Simple, bolt-on installation with included hardware. securely to your vehicle's chassis Electrical bracket lets you easily mount a round electrical connector plug Instructions and necessary hardware included Compatible with all etrailer and Demco tow bars
... industry-standard 3-prongplug. Requires 4-1/2" hole in trailer for flange to sit flush Accepts industry-standard 3-prongplug (sold separately) DOT compliant Meets FMVSS 108 and CMVSS requirements for automotive lighting Specs
5-1/2" Diameter round. Waterproof trailer light serves 3 functions: stop, turn, and tail. Durable polycarbonate lens and housing. Mounts on trailer with built-in flange. Accepts standard 3-prong ... Mounts on trailer with built-in flange - hardware not included Requires a 4-1/2" round hole for installation Accepts industry standard 3-prongplug (A45PB and A47PB - both sold separately) DOT
Specially designed to attach to the receivers in your factory 5th-wheel towing prep package, the slider base on this hitch helps eliminate clearance concerns during slow-speed turns. Dual-jaw hitch removes without a trace for full bed access. Fully articulating head eases hookup and helps to limit chucking Pivots front-to-back and side-to-side 3 Height settings to fit your application Quiet, rattle-free ride with polyurethane bushings Quick
... ). Accepts standard 2-prongplug. P2 rated. and acrylic lens Red lens over white LEDs Compatible with 12V DC systems Recessed mount with grommet (A54GB sold separately) Accepts industry standard 2-prongplug DOT compliant P2 rated Specs: Dimensions
... to trailer. 3-Prong molded plug included Molded 3-prongplug provides a watertight connection DOT compliant Specs: Configuration: passenger side Driver side: STL0067RPG (sold separately) Dimensions: 7-3/4" long x 3-1/8" tall x
... ). Accepts standard 2-prongplug. P2 rated. Compatible with 12V DC electrical systems Flush mount to trailer with grommet (A54GB - sold separately) Accepts industry standard 2-prongplug (A46PB or A86PB - sold separately) DOT compliant P2 rated Specs
... with grommet (sold separately). Accepts 3-prongplug. protects the incandescent bulb Durable polycarbonate lens and housing Red lens Compatible with 12V DC systems Flush mount with grommet (A70GB - sold separately) Accepts industry standard 3-prongplug (A45PB
... mount to trailer. 3-Prong molded plug. and housing Red screw-on lens over white LED Surface mount on trailer - hardware included Molded 3-prongplug provides a watertight connection DOT compliant Specs: Configuration: driver side Passenger side
Hub-and-drum assembly fits 9K to 10K axles manufactured after July 2009. Inner bearing (387A) and race, outer bearing (25580) and race, oil cap with plug and seal, wheel retaining ring, lug nuts ... diameter: 4-3/4" Drum size: 12-1/4" x 3-3/8" Weight capacity: 5,000 lbs Bearing, Race, and Seal Information Bearings (included) Inner bearing: 387A (2.250" inner diameter) Outer bearing
... standard 2-prong or 3-prongplug. 3-prongplug - sold separately Specs: Dimensions: 6-7/16" long x 2-5/16" tall x 1-3/4" thick Diodes: 10 Power draw at 12.8V: 0.080 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof
Trailer Hub Grease Seals Two 10-36 Seals per Package Double Lip Seal For single lip seal see # 42385 I.D. O.D. Use With: 2.250 3.376 E-Z Lube End Units Seal Cross-Reference Dexter # Transcom #
6-7/16" x 2-5/16" Oval. Waterproof light serves 4 functions: stop, turn, tail, and backup light. Recessed mount with grommet (sold separately). Accepts 2-prongplug for backup and 3-prong ... separately) 2-Prongplug for backup light function 3-Prongplug for tail light functions DOT compliant Specs: Overall dimensions: 6-7/16" long x 2-5/16" tall x 1-1/2" deep Diodes: 16 Power draw
Utilize the empty space left by your old steps when you upgraded to the MORryde steps with this locking storage box. Store your wheel chocks, power cords, step broom, and other tools in the 1-1/2 cu ft space. Includes hardware, lock, and 2 keys.: Dimensions: 10" deep x 10-1/2" tall Overall width: With brackets: 27-3/4" Without brackets: 25-3/4" Storage capacity: 1-1/2 cu ft Weight capacity: 50 lbs 1-Year limited warranty
Filter Results
