Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...Yes, you can replace your GE air conditoner with an Advent air conditioner like the Advent Air RV Air Conditioner #ACM150. Additionally, you will also need a thermostat. For that, you can use the Air Distribution Box w/ Built-In Thermostat for…
view full answer...It comes down to the serial number on how to pick between the 9420 part #RM-9420 and the 9425 part #RM77FR. If the serial number is below 27,496 then you go with the 9420 or if it's above that number you go with #RM77FR.
view full answer...The LED lights on your 2018 Jeep Wrangler JL use the same wiring harnesses available for incanescent lights. I've linked our selection for you. I like to recommend the diode kit, part #RM-15267, because it installs a 6-way at the front of the…
view full answer...To flat tow a 2011 to 2013 Jeep Grand Cherokee there are 5 major components needed: base plates, tow bar, safety cables, lighting, and supplemental braking. The base plates are what attach to the front of the Jeep and provide a safe and proper…
view full answer...For your Roadmaster Sterling Tow Bar #RM-576 the replacement stinger part #910019-40 is the correct replacement. The nut is included so if you need a horizontal bolt too you'd also need the part #RM350191-00.
view full answer...If you use a circuit tester like part #PTW2993 you should be able to locate some wires behind or around your brake pedal and test them. If one gets hot only when your brake pedal is pressed, then you can connect the RoadMaster Transmitter #RM-9420 to…
view full answer...I spoke to my contact at Roadmaster and he informed me that there is no way to adapt your older style Roadmaster tow bar to the new stinger. If yours is still good and you were just looking to replace the stinger as preventative maintenance I would…
view full answer...The replacement shank you need for your Roadmaster Sterling is the part #9100019-40 that you referenced.
view full answer...Yes we have confirmed with Roadmaster that the shank #910019-40 does fit the Roadmaster Sterling models that had a 6k capacity so this would work.
view full answer...The best replacement option we offer for a Micro-Flex 349 Trailer Clearance Light is the Trailer Clearance or Side Marker Light part #MC32AB which is not the exact same shape but very similar and almost the same size. It also uses the same mounting…
view full answer...The SMI Stay-IN-Play DUO Supplemental Braking System part #SM99251 comes with a monitor light that will get installed in the windshield of the tow vehicle and will then illuminate when the brakes in the towed vehicle are applied. If you want…
view full answer...Related Searches
Filter Your Search
Contact and Help