SeeLeveL RV Holding Tank Monitoring System - Fresh, Gray, Black - Water Pump Switch

SeeLeveL Smart RV - SE39VR

If your RV tank monitor readings change from 25% to empty in the blink of an eye, that's a problem. SeeLeveL sensors track 3 holding tanks with single-digit accuracy at the monitor. Also displays battery voltage and includes water pump switch.

Features:

• Monitoring system tracks and displays the levels of your RV's holding tanks at the push of a button
  • Hardwires to SeeLeveL sensors - includes (3) 12" sensors for fresh, gray, and black tanks
• Sensors mount to the outside of the holding tanks rather than using interior probes
  • Prevents false readings caused by accumulating debris
  • Provides readings with single-digit accuracy
  • Can be trimmed or stacked with an additional sensor to match your tank size
• Display monitor also shows your battery voltage
  • Diagnostic mode checks status and signal strength of sensors
  • Error codes alert you of any issues - check the manual for suggested solutions
• Integrated switch activates water pump
  • 3-Way function lets you connect to switches in your bathroom, kitchen, or elsewhere
• Multiple monitors can be used so you can check tank status from the service bay and inside your RV
• Easy installation - cut hole for recessed mount monitor, attach sensors on tanks, and hardwire together
  • Includes pigtail needed for installation
  • Tabs on top of sensor are trimmed to indicate which tank it is on
  • Length can be trimmed every 1-1/2" to match the height of your tank
  • Bus wiring lets all sensors splice together to one line
  • Existing wiring from your old tank monitor system can be used to ease install

Specs:

• Application: 3 tank systems for RVs and motorhomes
  • 1 sensor can accommodate 5" - 13" tall tanks
  • Stack additional sensor to accommodate tanks up to 25" tall
• Monitor dimensions: 4" wide x 2-13/16" tall x 1-1/4" deep
• Operating temperature range: 32 F - 140 F
• Operating voltage range: 11V - 16V
• Sensor quantity: 3
• Sensor length: 12"
• 1-Year limited warranty

Advanced RV Tank Monitoring

Traditional tank monitors have a reputation for being unreliable. Only a few sensors are installed inside, meaning that they usually only measure in quarter increments and can send false readings if they get dirty. When you're keeping an eye on how much fresh water you have, the difference between 25% full and empty means a lot, and that inaccuracy can be a problem.

The SeeLeveL tank monitoring system uses technology that can sense fluid levels from the outside of the tank. The sensors' flexible circuit board sticks in place and measures along its entire height. This makes it accurate in single-digit increments.

709-P3 SeeLeveL RV Holding Tank Monitor for 3 Tank Systems - Battery - Water Pump Switch

710-ES2 SeeLeveL Sender for RV Holding Tank Monitor Display - 12" Long - 7 Tanks

Installation Details