The difference between the etrailer #e95ZR and Curt #C13427 trailer hitches for your 2023 Hyundai Palisade is literally just the finish. The etrailer hitch has a matte black finish while the Curt hitch has the classic glossy black finish that we see…
When we installed the Curt Hitch #C13427 on our 2020 Hyundai Palisade, the distance from the center of the hitch pin hole to the edge of the rear bumper is 5-1/2". That's slightly further out than the other hitch you were looking at. My…
What you are looking for is a Torx wood screw based on the picture you sent to me. For that we have the 1-1/2 inch long part #TFX150ACQ which would work well. It has a 1/4 inch diameter and was designed for treated wood like it looks like you have as…
Hey, Stephen! We got just what you need. Since you don't have a tow package, I'm not sure if you have a hitch on your 2025 Ford Ranger so I'll include one just in case. Draw-Tite Max-Frame Trailer Hitch Receiver Part #DT35PR Curt…
As long as your truck originally was a cab and chassis model of truck before the dump bed was installed the Buyers Products Hitch Plate with Receiver Tube - Chevy/GMC #3371809065 that you referenced would fit and work well.
For your 2020 Hyundai Palisade Limited edition you will need a wiring kit to transfer the light signals to your trailer, the pre-wiring provides a plug for the trailer wiring to hook up. I recommend Curt T-Connector Vehicle Wiring Harness #CU94FR. It…
The 205/75-15 Tire and Wheel Combo, #AM32395, is 8.1 inches wide and 27.3 inches tall. An F78-14 tire and wheel will be about the same width but it will be 1 inch shorter. I have included a link to a tire size FAQ article that should help.
Yes, in order to set your trailer up for use with shore power you will first need an AC distribution panel. For this, I recommend a Progressive Dynamics Series AC Distribution Panel. In order to bring power into the panel you will also need a power…
I can definitely help you out with that. On my end, I could not find a Hopkins 7-pin SAE J1128. With that being said, the most common 7-way on your F-350's end will look like the pins on the 7- and 4-Pole Trailer Connector Socket w/ Mounting…
When it comes to replacing your trailer wiring on your 16 foot trailer I recommend The 7-Way Molded Connector w/ 15 foot Cable - Trailer End #50-67-106 will work. It is 18 foot and the wire gauges are as followed: Black/White - 10 Gauge Blue - 12…
The 40-amp circuit on your 7-way is really intended for delivering only a modest current to maintain an already-charged trailer battery while you're driving. It is not really intended for operating a power-hungry item such as a winch. A safer…
Filters
