B and W Turnoverball Gooseneck Trailer Hitch Installation - 2019 Ford F-250 Super Duty Video

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

When installing the B&W Turnoverball Underbed Gooseneck Trailer Hitch part #BWGNRK1116 on a 2019 Ford F-250, you will need to drill the hitch ball hole 45-1/2" back from the edge of the bed. This may or may not line up perfectly with the…

The Curt Custom Underbed OEM-Style Gooseneck Trailer Hitch - 30,000lbs #C60700 is going to install directly over the rear axle of your 2022 Ford F-250 Super Duty. This best allows the hitch weight of the trailer to be evenly distributed across the…

The airbags that I recommend for your 2018 Ford F-250 are the Air Lift LoadLifter 5000 Air Helper Springs part #AL57399. These airbags will not interfere with the B&W Turnoverball Underbed Gooseneck Trailer Hitch part #BWGNRK1116 as you can see…

There is no difference between the B and W Turnoverball Gooseneck hitches #BWGNRK1116 and #BWGNRK1116-5W. We have them separated in our fit guides with two different part numbers since it shows up twice in our fitguide. One as a gooseneck hitch and…

The newer trucks are a bit taller than the older ones but in general the bed rail heights and trailer heights are still compatible. The ideal minimum clearance between the trailer overhang and the truck bed rail should be 6 inches with the trailer…

Great questions! Reese actually makes the OEM puck system for Ford so if the 2022 F-250 is cheaper by a lot then I recommend going that route and installing the Under-Bed Rail and Installation Kit #RP87FR. The only thing you'll really be missing…

The OEM puck system is optional for Ford pickups so the only way to tell if your 2017 Ford F-250 has the puck system or not is to physically look in the bed for the pucks like what you see in the attached photo. If you do have the puck system then I…

I took a look at the Bargman Door Latch 10-30-051 that you referenced and it is indeed oversized. The best option we have to replace this would be the Global Link RV Entry Door Locking Latch Kit part #295-000019 which can install in an opening up to…

From the numbers you provided it sounds like you need replacement grease seals. In my research, the grease seals I found with the GS-1719DL number have a 1.72 inside diameter and 2.565 outside diameter. The replacement double lip grease seals you…

The release for the Turnoverball gooseneck hitches #BWGNRK1116 would require you to most likely put a notch in the wheel well guards you plan to install as well. We have had customer come back and tell us they didn't need to notch the guards.

Thank you for the pictures you sent to help verify the 6401 air bag used in your old #F2400 kit. Unfortunately the compatible kits for your 2020 Ford F-250 Super duty use the 8397 and 6397 air bags so you won't be able to just swap out the…