Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Yes, you are correct. In order to correctly take this measurement you will need to measure from the center of the spindle to the center of the main axle tube. I have included a picture for reference.
view full answer...If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…
view full answer...The DeeMaxx item #DE86VR won't because of the spacing on the mounting bracket but I have a caliper that will. To replace your Tie Down Engineering 46304 caliper you will need the Kodiak Disc Brake Caliper item #KDBC225DAC.
view full answer...For a replacement you need the Titan Zinc-Plated Brake Actuator #T2477600. This is the Titan Model 10 which is the same as the Dexter DX12.5 you currently have on your boat trailer.
view full answer...No, I am sorry we do not. The only ramps we have available are ones like Item #288-07503 that are detachable. We do not manufacturer them either.
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...I am happy to verify for you that your 2023 Nissan Frontier Pro 4X is 100% compatible with the Draw-Tite front hitch that fits, which is the following part number: - Draw-Tite Front Mount Trailer Hitch Receiver #65075 So you will have no issues…
view full answer...The 2.5-Watt Solar Battery Charger #PTW2997 that you referenced will have 2.5 watts of power for output, but that is under the right circumstances. If you are in a heavily shaded area then that would affect the output compared to if you were out in…
view full answer...I believe you are referring to the 1" prongs on the Stallion Aluminum Car Hauler Ramp Set #288-07503 that are designed to grab onto the small gap at the end of most trailers. This not only provides a secure connection when loading/unloading, but…
view full answer...We do have a hydraulic disc brake kit that will fit 8 bolt hub, 8 on 6-1/2 Inch bolt pattern, 1/2 inch bolts. In addition to a hydraulic disk brake kit, you will also need a brake line kit, and a electric over hydraulic actuator, and a brake…
view full answer...OEM brake controllers differ from aftermarket controllers in that in addition to getting input from the stop lamp circuit, they also get inputs from the vehicle's PCM, so they're more sophisticated than an aftermarket brake controller which…
view full answer...Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…
view full answer...Related Searches
Filter Your Search