Flint Hill Goods 30" x 50" Wheelchair Carrier w/ 48" Ramp - 2" Hitch

See what our Experts say about this Flint Hill Goods Hitch Cargo Carrier

• How Much Does Curt 30x50 Wheelchair Carrier # FHG77ZR Weigh
  The Flint Hill Goods 30x50 Wheelchair Carrier # FHG77ZR weighs 80 pounds. My stepdad uses this to haul all sorts of stuff and he loves it.
  view full answer...
• Recommended Cargo Carrier For Wheel Chair on 2010 Chevy Avalanche
  For your 2010 Chevy Avalanche, I recommend the Flint Hill Goods 30" x 50" Wheelchair Carrier w/ 48" Ramp - 2" Hitch # FHG77ZR. This will give you a nice long ramp to allow you to reach the curb easily and give you a ramp that is not too steep. Unfortunately, we don't have anywhere you can see the product in SW Michigan, but I've attached a video to assist as much as possible with the visual. This carrier will allow you to get in the bed of your truck with the carrier attached but unloaded...
  view full answer...
  
• Folding Mobility Scooter Carrier Recommendation with Ramp
  We have folding cargo carriers with ramps which work great for transporting mobility scooters, but we do not have any that are "lightweight" as the have to be reinforced for strength as well as the ramps add quite a bit of weight. Most of them are made of steel and heavy. However, I do have a solution for you. We have the Flint Hill Goods 30x50 Wheelchair Carrier # FHG77ZR which would work well. It has a capacity of 500 lbs, has a built 48" in ramp, is folding and has inside dimensions...
  view full answer...
• Hitch Mounted Cargo Carrier with Ramp to Clear Spare of 2016 Jeep Wrangler
  For a cargo carrier that would clear the spare of your 2016 Jeep Wrangler the Flint Hill Goods Carrier part # FHG77ZR would be your best option. This carrier has a distance of 14 inches from the center of its hitch pin hole to the nearest rail of the carrier. Most Wranglers have around 12 inches from the center of their hitch pin hole to the outer edge of the spare if the spare is the stock size. I attached a review video for you to check out as well.
  view full answer...
• How Much Does Flint Hill Goods 30x50 Wheelchair Carrier w/ 48 Long Ramp # FHG77ZR Weigh
  The Flint Hill Goods 30x50 Wheelchair Carrier w/ 48" Long Ramp # FHG77ZR that you referenced weighs 80 lbs.
  view full answer...
• Total Capacity of a 2017 Kia Sportage When Equipped with a Class III Hitch
  According to my research, the 2017 Kia Sportage SX is only rated itself to be able to carry 220 pounds of tongue weight safely. You will want to verify this with your owner's manual for vehicle specific information. If your carrier turns out to be too heavy, I recommend instead purchasing the Flint Hill Goods Cargo Carrier with Ramp, part # FHG77ZR. This ramped carrier comes in at 80 pounds, and would put you at a much safer weight total of 260 pounds. Exceeding the weight capacity of...
  view full answer...
• Folding Cargo Carrier Recommendation
  The 30X50 Flint Hill Goods Cargo Carrier # FHG77ZR and it is a folding carrier. This means it will fold up when not in use and you will not need an additional adapter to do this. You will have to make sure that you have enough clearance so that it does not hit the back of your bumper when folded. When folded, the # FHG77ZR needs more than 4-3/4" from the center of the hitch-pin hole to the back of your bumper.
  view full answer...
• Recommended Ramped Hitch Cargo Carrier for Transporting Generator on Jeep Wrangler
  We do offer a range of ramp-equipped platform type hitch-mount cargo carriers that can work for your generator. You will want to confirm that the 2-inch hitch on the Wrangler is rated for the combined weight of the 300-lb generator plus the weight of the specific carrier you select. The Jeep itself also needs to be rated for this combined tongue weight, which will approach 400-lbs. For a carrier that folds up when not in use you can consider the Flint Hill Goods # FHG77ZR which has a platform...
  view full answer...
• Recommended Heavy-Duty Cargo Carrier with a Ramp
  The closest hitch mounted cargo carrier we have to the UC500 is the Flint Hill Goods # FHG77ZR. This carrier measures 30 by 50 inches with a 48 inch ramp. The weight capacity is 500 pounds. I've attached a video for you as well.
  view full answer...
• Can the Flint Hill Goods 30" x 50" Wheelchair Carrier Be Installed With the Ramp on the Drivers Side
  Yes, the Flint Hill Goods 30" x 50" Wheelchair Carrier w/ 48" Ramp # FHG77ZR can be installed with the ramp on the drivers (traffic) side. The # FHG77ZR comes disassembled, the instructions will have the carrier oriented to open on the passenger (curb) side. So during installation you would want the open side of the carrier facing the opposite way of the instructions. The reason that this carrier and all other carriers are "designed" to open on the passenger (curb) side is for safety reasons....
  view full answer...
• Weight and Capacity of Flint Hill Goods 30x50 Wheelchair Carrier
  The Flint Hill Goods 30x50 Wheelchair Carrier# FHG77ZR weighs 80 lbs. However, this product has a weight capacity to handle up 500 lbs. The towing capacity of most 2007 Honda Odyssey is 350 lbs TW and 3,500lbs GTW (please check owner's manual for towing capacity). For your wife's new electric wheelchair being around 151lbs, you should have more than enough capacity to carry it without issues. TW- Tongue Weight GTW- Gross Towing weight
  view full answer...
• Can Flint Hill Goods Cargo Carrier # FHG77ZR Transport Permobil M3 Power Wheelchair
  Based on my research, it looks like your Permobil M3 Power Wheelchair has a base width of 24 inches and a length of 35-1/2 inches. I do recommend verifying these measurements, as it's possible that you have a slightly different model. The Flint Hill Goods Cargo Carrier # FHG77ZR referenced in your question has inside dimensions that are 48" long x 28" wide x 5" deep. With this in mind, the cargo carrier platform can support the size of the wheelchair without issue. I also found that the...
  view full answer...
• Hitch Mounted Cargo Carrier with Ramp to Carry 430 lb Wheelchair
  The hitch cargo carrier part # FHG77ZR has a 500 lb capacity and a ramp that is 48 inches long so it would work well in both those regards. Your 2007 Toyota Tundra would need to have a hitch installed on it that has a tongue weight capacity of at least 500 pounds which would be high enough for the weight of the wheelchair and the weight of the carrier. Which this carrier weighs 77 pounds. So the 430 plus the 77 would definitely work on this if your hitch and vehicle would allow the 507 pounds.
  view full answer...
• Recommendation for Hitch Mounted Carrier with Ramp that Can Fold Up for Storage
  I recommend looking at the Flint Hill Goods 30x50 Cargo Carrier # FHG77ZR. This carrier includes a built-in 48 inch long ramp for easy loading and unloading. This carrier has the ability to completely pivot up alongside the rear of the vehicle for compact storage. The ramp can also be folded up into the carrier basket. However, you have to have room on your vehicle for it to do so. Because of the rails on the carrier, when the carrier is folded the closest part of the carrier is 4-3/4"...
  view full answer...
• Total Weight of the Flint Hill Goods 30x50 Wheelchair Carrier # FHG77ZR
  The total weight of the Flint Hill Goods 30x50 Wheelchair Carrier # FHG77ZR is 80 lbs and it has a capacity of 500 pounds. I'd recommend a helper when installing or removing it from a hitch. The carriers with ramps are all pretty heavy due to the amount of metal needed for the ramp, even the # FHG689ZR aluminum version of this carrier still 77 pounds.
  view full answer...
• Hitch Cargo Carrier Recommendation for Transporting Snow Blower
  I highly recommend the Flint Hill Goods 29" x 50" Cargo Carrier w Ramp # FHG67ZR for transporting your snow blower around town. This has the ramp for easy loading but it only weighs in at 53.95 lbs. Initially that sounds pretty heavy but when you compare it to the 75.5 lb weight of the steel alternative, part # FHG77ZR, you see it sheds about 20 lbs off the total weight. The carrier I'm recommending is made of aluminum which is why it's lighter. The aluminum construction not only helps...
  view full answer...
  
• Lightest Weight Cargo Carrier for Power Wheel Chair with Ramp
  The lightest cargo carrier also has the longest ramp. We offer the 29x49 Flint Hill Goods Cargo Carrier part # FHG69ZR which weighs 77 lbs . I don't have the weight of just the gate, but I could estimate around 10-15 lbs. The 30 X 50 steel version # FHG77ZR is 80 pounds and has a 48" ramp. This carrier also folds when not in use. I included videos of both of these carriers for you to check out.
  view full answer...
• Hitch-Mount Cargo Carrier for Toyota Tundra for Use Transporting 150-lb Outboard Motor
  Since I do not know what class of hitch you have on your Tundra I suggest you start by checking its safety sticker to confirm its tongue weight rating, which is the downward force applied to the hitch. As an example, a 2013 Toyota Tundra can be equipped with any of three classes of 2-inch trailer hitch: Class III, Class IV and Class V. Please see the link provided. The good news is that any of these should have enough capacity for the weight of your 150-lb motor and stand plus the weight...
  view full answer...
• Recommended Folding Cargo Carrier With Ramp
  I am not familiar with that carrier or brand, but for a cargo carrier with a ramp and a folding feature, I recommend the Flint Hill Goods 30x50 Wheelchair Carrier w/ 48" Long Ramp - 2" Hitches - Folding - 500 lbs # FHG77ZR. This is a steel constructed carrier and is rated for 500 lbs. It folds when not in use as long as your hitch sits out far enough. The closest part of the carrier is 4-3/4" from the center of the hitch pin hole when folded due to the raised side rails. I've attached...
  view full answer...
• Trailer Hitch Recommendation for 2011 Nissan Rogue For Wheelchair Carrier
  For your 2011 Nissan Rogue the hitch we would recommend is the Draw Tite part # 75902 which is a confirmed fit. This is a Class III hitch with 350 lbs of tongue weight capacity. I attached an install video for you to check out as well. For a carrier with a ramps we have the Flint Hill Goods part # FHG77ZR which is 30 by 50 inches and has a 500 lb capacity.
  view full answer...
• Cargo Carrier with Ramp that is Wider than 30 inches for Snowblower
  The closest option we have to what you are looking for would be the Flint Hill Goods cargo carrier part # FHG77ZR which has interior dimensions 48" long x 28" wide x 5" deep. The ramp is longer at 48 inches long.
  view full answer...
  
• Hitch and Power Scooter Carrier Recommendation for 2006 Buick Rendezvous
  When it comes to a hitch for your 2006 Buick Rendezvous, I recommend going with the Curt Custom Fit Trailer Hitch Receiver, # 13469. This hitch is economical, has a tongue weight capacity of 350 lbs, and will provide you with a 2 inch receiver opening for towing or hitch mounted accessories. Check out the Flint Hill Goods Carrier with 48 Inch Long Ramp, # FHG77ZR. While standing next to the carrier you could power the scooter up the ramp onto the platform, fold the ramp and you are ready...
  view full answer...
• Folding Cargo Carrier Recommendation that has a Ramp
  While we don't have exactly what you are looking for, I'll tell you what we have. The Flint Hill Goods Carrier part # FHG77ZR is 30 X 50 X 6-1/2 inches and has a 48-inch ramp. It sits 14 inches away from the hitch pin hole when in use and 4-3/4 inches when folded and has a 500-pound capacity and weighs 80 pounds. This carrier is made of steel and requires a 2" hitch. It folds up against the vehicle. I attached a review video for you to check out.
  view full answer...
• Generator Cargo Carrier for a 2000 Honda Odyssey
  Your best setup is going to be a Class III trailer hitch with a ramped carrier, given the dry weight of the generator. 300 pounds is a pain to lift off of the ground even once, so we'll stick to ramps. Prior to equipping the hitch, you'll want to verify your vehicle's towing and tongue weight capacity with your owner's manual or manufacturer. For the trailer hitch, your best option is the Draw-Tite Class III Max Frame Receiver, part # 75270. This provides the ability to take advantage...
  view full answer...

Do you have a question about this Hitch Cargo Carrier?