Gen-Y Hitch Aluminum Loading Ramp Set - 96" Long x 15" Wide - 10,000 lbs
(196 reviews)
Price: $854.99
Gen-Y Hitch Aluminum Loading Ramp Set - 96" Long x 15" Wide - 10,000 lbs
Item # 325-GH-R96
Our Price: $854.99
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (196)
- Q & A (0)
- Photos
Gen-Y Hitch Car Ramps - 325-GH-R96
- Loading Ramps
- Car Hauler Ramps
- 96 Inch Long
- 10000 lbs
- Gen-Y Hitch
- 15 Inch Wide
Lightweight aluminum ramps let you load your vehicle into your trailer. Serrated panels grip wheels, even in wet conditions. Each ramp supports 5,000 lbs of weight. Extra-long surfaces minimize the angle needed when loading your trailer.
Features:
- Non-folding loading ramps let you load heavy vehicles or wheeled equipment into your trailer
- Serrated rungs grip wheels even if the ramps or wheels are wet
- Extra-long ramp surfaces reduce the required angle to load your vehicle
- Gradual incline lets you easily drive your vehicle up the ramps
- Angled base keeps the ramp at the ideal pitch for loading
- Sturdy hooked ends attach to your trailer deck
- Aluminum construction is lightweight and corrosion resistant
- Made in the USA
Specs:
- Quantity: 2 ramps
- Weight capacity: 10,000 lbs (5,000 lbs per ramp)
- Ramp dimensions: 96" long x 15" wide x 3-1/4" thick
- Rung dimensions: 15" long x 2" wide
- Distance in between each rung: 4-1/8"
- Ramp weight: 53 lbs per ramp
- 1-Year warranty
Hooked Ends Secure to Trailer
Each of these heavy-duty Gen-Y Hitch ramps has a large, sturdy hook welded to the top. These hooks tightly grab onto the edge of your trailer deck. With this secure grip, the ramps will stay connected to your trailer as you load your equipment.
Extra Long for Easy Loading
At 96", these Gen-Y Hitch ramps are long enough to maintain a gentle angle so that you can gradually drive your vehicle up and into your trailer bed. In addition, the slight incline will make it easier to maneuver your vehicle up the ramps, and it will exert less wear on your vehicle's engine than driving up a steep slope.
The bottom of the ramp also has a strong, angled base, which will keep the ramp at the proper pitch for even easier loading.
GH-16096 GenY Hitch Heavy Duty Aluminum Ramp Set - 8' Long - 10K Capacity - Quantity 2
Replaces GH-R96
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
Gen-Y Hitch Aluminum Loading Ramp Set - 96" Long x 15" Wide - 10,000 lbs - 325-GH-R96
Average Customer Rating: 4.9 out of 5 stars (196 Customer Reviews)
Lightweight aluminum ramps let you load your vehicle into your trailer. Serrated panels grip wheels, even in wet conditions. Each ramp supports 5,000 lbs of weight. Extra-long surfaces minimize the angle needed when loading your trailer.by: Matt11/27/2023
Ramps were not the same part number. Pair did not match.
Otherwise very nice quality.
by: Ken04/25/2022
Well built and able to move alone.
Shipment came with deep gouges on corners of tube. Will watch for cracking and bending due to damage
Ken
4/26/2023
Been using for the last year to load and unload our excavator. These ramps are light weight and can take the load we desired!
by: Dean 08/31/2023
I love these ramps, they work perfectly for loading my John deere on to my dump trailer.
by: Dusty 12/22/2021
I Couldn’t be happier, they were the best purchase for my needs. I bought a new 14’ dump trailer with a gross rating 14,000# and the ramps that came with it took two men and a boy to put them in place..
My new Gen-Y Aluminum Loading Ramp Set -96” Long X 15” Wide - 10,000# rating were a game changer. At 74 years old I can easily carry them one at a time.
Dusty W.
12/23/2022
I have nothing but GOOD to say about the Ramps as it made it so much easier to use with my 14 ft dump trailer. The ramps that came with my trailer were twice or more in weight. I would advise anyone to spend the extra dollars for these ramps.
by: Greg 09/12/2023
Ramps are very well built. We are using them to load our pull truck. Very satisfied with product.
by: Shawn 07/13/2022
these ramps are stout, and just light enough to carry i would not worry about strength
Shawn B.
7/13/2023
these ramps are great,light enough and very strong. i use them to load my jeep onto flatbed
by: Jerry 03/13/2023
quality ramps, super fast shipping & a price that is hard to beat! This will be my only source for trailer ramps & all trailer parts in the future. Thanks!
by: Stan 12/06/2022
The 8' x 15" aluminum ramps are exactly what I was looking for and were delivered in excellant condition packaged in a cardboard box. The UPS shipping was a little sketchy as the contract driver in his personal small SUV delivered this long package that went from the windshield dash to a foot hanging out the back, I should have taken a photo. It was delivered 4 days late as I am sure nobody wanted to deliver this 115Lb long package.
by: Matthew 07/29/2023
built very strong and delivery was very good
by: Hendo12/19/2022
These ramps arrived in excellent condition. They are of quality craftsmanship. Unfortunately, I haven’t been able to use them yet as I’m buried in snow. Will post a follow up review with pictures once the snow goes away.
by: Ronnie 12/02/2022
Super Deal and CUSTOMER SERVICE.Ya'll got my bussiness !.
The RAMPS are off tha CHAIN " Just what tha DR. ordered " No more " HEMMORIDS ".
by: Gggggg02/12/2020
I load 7500 lb. equipment with them and they still look fantastic and showing no wear.
by: David 10/10/2022
Have had for a year. Excellent ramps. Use for loading tractor onto trailer.
by: Dallas O05/25/2021
Great ramps. I purchased them to use on my PJ tilt trailer in place of the standard steel ramps that came with the trailer. Those ramps were a back breaking job to use. Other than having to make a slight modification to the ramp storage compartment. They work great. I load/unload my 33 horse power tractor with front end loader and box blade with ease. Ramps have great traction and fit secure to rear of the trailer.
Thanks Gen-Y Hitch.
by: Lois04/19/2023
It was very quick delivery. Thanks
by: Kyle 03/01/2023
Very stout ramps! They hold up great and look and function even better than expected. Absolutely will be purchasing from you guys again!
by: Paul 11/05/2021
they are very heavy duty, i use them to load a 5000lbs man lift and a excavator with no issues.
Paul
11/5/2022
Still working like new
by: Dennis 05/21/2023
Very well built
by: Michael04/03/2022
they worked awesome. had open trailer, had to disconnect whellie bars before loading. not now. worked great.
by: Harold12/29/2022
It's a little heavy for me but very nice.better then my steal tramps!!
by: Kevin 02/04/2023
Really really nicely built ramps
by: Michael 12/10/2022
Arrived on time and was exactly what we needed.
by: Zandra03/17/2021
XLNT!!! Ordered the ramps as a gift and received excellent (XLNT) assistant in placing the order; in courteous assistance with my questions; in being notified of the order placement; with great item tracking and expected delivery date; and finally with being notified of the delivered items. Set up the ramps and they are working as advertised for our needs. Excellent assistance by my assigned rep who gets 5 stars from me. Bravo!
by: Robert 11/09/2022
Excellent product. Arrived earlier than stated.
by: Michael 11/05/2022
I haven't had time to use them yet.
25
195
Show More Reviews
See what our Experts say about this Gen-Y Hitch Car Ramps
- Gen-Y Hitch Loading Ramps # 325-GH-R96 for a 5,000 lb Scissor LiftEach ramp included with the Gen-Y Hitch Aluminum Loading Ramp Set # 325-GH-R96 can support up to 5,000 lbs each for a total of 10,000 lbs when the equipment being loaded is supported by both ramps. This weight capacity will be more than enough to use with your 5,000 lb scissor lift as long as you are able to use both ramps to support the weight of the scissor lift. Of course, your trailer will also need to be rated high enough to handle the 5,000 lb scissor lift. Check out the video linked...
view full answer... - Aluminum Thickness of Gen-Y Ramp Set 325-GH-R96I checked with Gen-Y and they informed me that their ramp set part # 325-GH-R96 is made from a double hollow tube, 3” x 5”, with a wall thickness of .125 A6063 alloy. This includes the hook end of the ramps as well.
view full answer... - Weight Capacity of Gen-Y Aluminum Loading Ramp Set 325-GH-R96The USA-made Gen-Y Aluminum Loading Ramps # 325-GH-R96 have a combined capacity of 10,000-lbs, well above your actual load of 7900-lbs, so I would expect no issues with loading your Excursion. The ramps have 20% more capacity than you need and I would consider that a very reasonable safety margin. Each ramp weighs about 50-lbs despite their lightweight aluminum construction so that suggests that a lot of material is used in their fabrication. I cannot comment on your original ramps since...
view full answer... - Ramp Recommendation for Loading Bobcat 331 Onto TrailerFor a Bobcat 331 that weighs up to 7,500 lbs I'd recommend the 10k ramps part # 325-GH-R96 that you referenced which are 96 inches long and 15 inches wide. I attached a picture of a heavier tractor being loaded with these ramps as well as a review video for more info as well.
view full answer...
- Can Gen-Y Aluminum Loading Ramps # 325-GH-R96 Be Used to Span Dip for Backing Up CamperAs long as they provide the needed length and track width, the Gen-Y Hitch Aluminum Loading Ramp Set # 325-GH-R96 that you referenced will work great for your application. They provide plenty of strength (10,000 pound capacity for the pair - which represents the highest rated set we have available) and their angled base will allow you to maintain an ideal loading angle for the camper and your Silverado. A flat set like this will work well to avoid dragging the skid plates on the trailer...
view full answer... - Hooked End Of Gen-Y Hitch Aluminum Loading Ramp Set # 325-GH-R96 Opening Measurement The Gen-Y Hitch Aluminum Loading Ramp Set # 325-GH-R96 has a gap of 1-1/2" for the distance between the ramp and the 1/4" hooked end which fits onto the trailer(see image).
view full answer...
- Can Tracked Equipment Be Loaded on Trailer Using 10K Gen-Y Hitch Aluminum Loading Ramp SetAs long as the tracks are rotating/moving when you're loading your excavator you'll be just fine using the Gen-Y Hitch Aluminum Loading Ramp Set # 325-GH-R96. That note is essentially saying not to drag something heavy up the ramp. A better terminology would probably be "rolling equipment" instead.
view full answer... - Gen-Y Aluminum Ramp Set-96 long X 15 Wide-10,000 lbs Material and Wall ThicknessI checked with Gen-Y and they informed me that their ramp set part # 325-GH-R96 is made from a double hollow tube, 3” x 5”, with a wall thickness of .125 A6063 alloy.
view full answer... - Can 10k Gen-Y Hitch Aluminum Loading Ramp Set be Used with 6k Track LoaderSince your track loader is only 6,000 lbs and the weight capacity of the Gen-Y aluminum loading ramps part # 325-GH-R96 is 10,000 lbs they'd easily work well for you. The tracks wouldn't put any additional stress on the ramps compared to tires and there isn't any type of time restriction that the machine would need to be off of them either.
view full answer... - Trailer Deck Height Range for 96" Long Gen-Y Hitch Aluminum Loading Ramp SetThe range of height for the Gen-Y Hitch Aluminum Loading Ramp Set - 96" Long x 15" Wide - 10,000 lbs # 325-GH-R96 is 20" - 36". This would be from the ground to the deck. I confirmed this with my contact at Gen-Y.
view full answer... - Is the Weight Rating for a Set of Loading Ramps Per AxleThe Gen-Y Hitch Aluminum Loading Ramp Set part # 325-GH-R84 has a 6,000 lb weight capacity which is for one axle. In most cases, both axles will never be on the ramp together so as long as the weight on either axles does not exceed 6,000 lbs then you will be good to go. However, if at any time there is more than 6,000 lbs on one axle you would need to upgrade to the Gen-Y Hitch Aluminum Loading Ramp Set part # 325-GH-R96 which has a 10,000 lb per axle weight capacity. I have attached...
view full answer... - Are There Trailer Ramps for Loading Cars That Keep Front End Up for Door ClearanceWe have options for loading ramps for a trailer to load up your vehicle, but none that are 10 inches or keep the front end up for door clearance when towing. Each of the available ramps hook onto the trailer and need to be removed after use; they are different lengths, widths, and capacities so you can get the one that will work for your vehicle. - 72" Long x 14" Wide - 6,000 lbs: Gen-Y Hitch Aluminum Loading Ramp Set # 325-GH-R72 - 84" Long x 14" Wide - 6,000 lbs: Gen-Y Hitch Aluminum...
view full answer... - Trailer Ramps With 10,000 Capacity to Load TruckWe do have an option for trailer ramps that have the weight capacity you need in order to load your 2015 Ford F-450, which from my research looks to have a curb weight of just under 9,000 lbs. So the ramps that will work for you are the Gen-Y Hitch Aluminum Loading Ramp Set # 325-GH-R96. This ramp set has a combined 10,000 lb capacity (5,000 lbs per ramp) which means it will be able to handle the weight of your F-450 (though I do recommend verifying the curb weight of your truck). These...
view full answer... - Ramp Set that Could be Used with 1997 Ford F-800A 1997 Ford F-800 can be pretty heavy based on how it is equipped. The best ramp set we have for that application would be the Gen-Y Ramps part # 325-GH-R96 have a 10,000 lb capacity. You'd still want to verify the weight of the truck though as it's possible it could weigh more than that. These ramps are 96 inches long and 15 inches wide.
view full answer... - Recommended 8 Foot Long Flat Ramps For Car Hauler TrailerI may have a solution for you, but we don't have the CargoSmart Arched Loading Ramp Set - Non-Folding - Aluminum - 90" x 12" - 3,000 lbs # 3483070 in a non-arched ramp. The only available flat ramp we have in close to 90" is the Gen-Y Hitch Aluminum Loading Ramp Set - 96" Long x 15" Wide - 10,000 lbs # 325-GH-R96. These are a heavy duty ramp set that is well rated for your race car and comes in an 8 foot long x 15" wide ramp section. I've linked a review video of these ramps for you to...
view full answer... - Best Lightweight Loading Ramp for Vehicle with Low Ground Clearance The best loading ramps we offer for vehicles with low ground clearance are the Gen-Y Hitch Aluminum Loading Ramp Set like part # 325-GH-R96 which are 8' long. Therefore they should allow for a very shallow approach angle. These ramp are also lightweight at around 50 lbs each so you can move them by yourself.
view full answer... - Why is there a Height Limit on Aluminum Car Hauler Ramp Set 288-07502The height restriction on ramp set # 288-07502 has to do with the distribution of the weight, ability for tires to grip, and clearance between the tops of the ramps and the vehicle rolling up them. The shorter the ramp the more severe the angle will be as the loading height increases. You could go with longer (and tougher) ramps using the Gen-Y options such as # 325-GH-R72, # 325-GH-R84, or # 325-GH-R96. These ramps will last pretty much forever since Gen-Y is known for making products...
view full answer... - Will The Gen-Y Hitch Aluminum Loading Ramp Allow For Use on a Dump Trailer? Our loading ramps like the Gen-Y Hitch Aluminum Loading Ramp Set # 325-GH-R96 are designed to hook into the channels generally found on car hauler type trailers. You could weld on this type of channel on the end of your trailer bed or cut some notches in your bed depending on the bed construction of your trailer. These ramps are 8' long and reasonably light at only 53lbs per ramp. With that light weight they are rated for weights up to 5,000lbs per ramp or up to 10,000lbs for your equipment.
view full answer... - What Type Of Ramp Do I Need To Load My 2002 F-250 Super Duty On A TrailerI did some research and your truck may weigh anywhere from just under 5,600 lbs to 6,182 lbs. You will be cutting it close with the Aluminum Car Hauler Ramp Set - 72" x 14-1/2" - 6,000 lbs - Qty 2, part # 288-07503. If your 2002 F-250 Super Duty comes in less than 6,000 lbs, you should have no problems with this ramp. If it weighs more than 6,000 lbs I cannot recommend it, no matter how little you plan on using it for this truck. The Gen-Y Hitch Aluminum Loading Ramp Set - 96" Long x...
view full answer... - What Ramps Are Good For Loading A Car Onto A Flat Bed TruckI do not think the Aluminum Car Hauler Ramp Set - 72" x 14-1/2" - 6,000 lbs - Qty 2 # 288-07503 would be the safest set of ramps for this particular job. They can handle the weight of the car no problem but looking at the picture you provided I do no think the angle of the ramps will be low enough to let the car get on the flat bed without bottoming out. I definetly recommend going with a longer set of ramps like the Gen-Y Hitch Aluminum Loading Ramp Set - 96" Long x 15" Wide - 10,000...
view full answer...
- What Car Loading Ramps Can I Use for Van Trailers 48 Inches High?For a ramp used to load vehicles, it is important to have a high maximum weight capacity. With that being said, I recommend the Gen-Y Hitch Aluminum Loading Ramp Set - 144" Long x 15" Wide - 8,000 lbs # 325-GH-R96. The Gen-Y Hitch Aluminum Ramp has a per-ramp weight capacity of 5,000 pounds (10,000 pounds total). As far as the 48-inch rise requirement, the Gen-Y is a great choice. I went ahead and attached a video that shows the ramp being used on the side of a trailer that is about 36...
view full answer... - Will the Gen-Y Hitch Aluminum Loading Ramp Set Work with a Skid SteerThe Gen-Y Hitch Aluminum Loading Ramp Set part # 325-GH-R96 have a capacity of up to 10,000 lbs for the pair. If you need a higher capacity, they also offer the Gen-Y Hitch Aluminum Loading Ramp Set part # GY52YR which have a capacity of up to 14,000 lbs for the pair. In regards to using the ramps with a skid steer, there are no exclusions about this from the manufacturer nor do they specify anything about not using vehicles with rubber tracks. Therefore, so long as you are under the...
view full answer... - What is the Angle of Hook for the Gen-Y Hitch Aluminum Loading Ramp SetThe hooked end on the Gen-Y Hitch Aluminum Loading Ramp Set # GY52YR is a 90 degree bend to the top part of the ramp that you drive on (see attached photo).
view full answer...
- Solution for Tilt Trailer that Doesn't Have Lip to Use Gen-Y Aluminum Loading Ramp 325-GH-R96Since you don't have a lip on your tilt trailer for the Gen-Y Aluminum Loading Ramp Set part # 325-GH-R96 to attach to you'd need to find a welder/fabricator near you who can add that to your trailer as we don't have anything that would provide that.
view full answer...
Do you have a question about this Car Ramp?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Expert Research:
Adam R
Installed by:
Randy B
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Justice A
Written by:
Alexander C
Video by:
Zach D
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Brooke M.
11/29/2023
Ugh! I am so sorry - how frustrating! I am relieved to see that you are already in contact with our customer service team about this. I know they will get you the correct part sent!