Search: ball mount lock   >   !Pintle Hitch   >  

Dico was bought out by Titan who now offers 5-on 4-1/2 idler hub #DX22XR. This hub is rated for 2500-lb axles and includes bearings, races, grease seal, grease cap, and lug nuts. You can be assured it will fit the trailer spindle as long as the…

We have just what you are looking for. I called my contact at TDE and asked about the hub you have on your boat trailer. They told me that it was a 5-stud idler hub for a 3,500-lb axle. That means you need the part #AKIHUB-545-35-K. This is a fit for…

We have the perfect replacement for your Atwood 84132 drum brake actuator, the Demco #DM72VR. Just like your Atwood, the Demco is for hydraulic drum brakes, rated for 7,000 lbs instead of 6000 lbs, mounts to a 3" wide trailer tongue and fits a…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The 3rd wire on a 3-wire breakaway switch like the Hopkins LED Breakaway Switch with 7" Lead Wires #HM20059 gets grounded to the trailer frame or tied in to the main ground on your trailers tongue. The only difference between a 2-wire and 3-wire…

For your 2019 Nissan Titan I recommend the Curt hitch part #C13304 as it has the highest weight capacities and has the shortest install listed as well. I attached an install video and picture for you to check out as well.

We have not yet (as of April 2019) had a chance to install any wired trailer brake controllers on a 2019 Ford Ranger so for guidance I checked with my most trusted brake controller expert at Tekonsha. Based on what I could learn about the truck if…

The Westin grille guards may look the same, but if this grille guard did not come from a 2007 Dodge Ram Pickup, it will not fit. The dimensions of your grille guard must be the same in order for the mounting brackets and the hardware to fit.…

Since the only difference between the SumoSprings Solo Custom Helper Springs #SS76MR and #SS86MR is the weight rating (the former being 1,000 lbs and the latter being 1,500 lbs) I recommend going with the lighter option - part #SS76MR. It would be…

In the 4-on-4 wheel bolt pattern we offer trailer wheels/tires from 8-inch up to 14-inch diameter, but no 15s. The available products in this bolt pattern are shown on the linked page. The highest weight capacity wheel/tire in this 4-on-4 pattern is…

Ways to raise the height of a trailer for better ground clearance include using larger wheels/tires and installing an axle over-under kit that reverses the placement of the springs and axle. An axle over-under kit (we offer two) will give you a…

It looks like you recently purchased some Kodiak Wheel Bolts #K58WB316 and 5/8" flange nuts #95188 from us, so thank you for being a loyal customer! What you'll want to torque those to will depend on the construction of your wheels and the…