Result: 90160

Hello Chris, Yes, it would be quite difficult to find a replacement master cylinder for your Dexter model LP75. The brake actuator was actually a Tie Down Engineering part that Dexter took over as Tie Down Engineering is no longer in business but…

The 85837 master cylinder and Atwood brake actuators have all been discontinued which explains why you have been unable to find the right parts. This means that your best option is to replace the entire brake actuator. The Brake Actuator #T63FR you…

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

Hello Bruce, thanks for reaching out. We do have leaf springs for 3,500 lb axle, so we may have something that will work for you. I will need to know the length of your current springs to make sure the new ones will fit into your suspension. For…

Hey Cory! To avoid any splicing you can use the T-One Vehicle Wiring Harness with 7-Way Trailer Connector #118283. This plugs into your factory wiring behind your bumper for a simple installation. Check out the attached picture. Once your 7-way is…

According to my research, the correct replacement rotor for your Dexter 12K Axle (Non-ABS) is the Replacement Rotor for Dexter Disc Brakes part #070-006-01 which measures 11" in diameter. The Dexter 10K and 12K axles will both use the same…

For your 2011 Chevy Suburban with factory 7-way, the Tekonsha Prodigy P3 #90195 is a great option for a brake controller. There is not a plug and play harness for any brake controller on your vehicle as there is no plug present under the dash. The…

I would be happy to help! You can absolutely use the Universal Wiring Adapter #C51515 to install the Curt Triflex Trailer Brake Controller #C24VV in your new 2021 Ford Ranger. This harness will plug into the controller plug and the wires on the other…

Yes! According to your provided numbers, you have the MaxxAir model 4700k. For that model, the part you need is the Replacement Printed Circuit Board for MaxxAir Powered Lift RV Roof Vents w/ Reversible Fan #MA10A21275K. This is the same as the…

The Easy Grease Trailer Idler Hub Assembly for 3.5K Axles part #AKIHUB-545-35-G-EZ-K is a direct replacement for a UFP H-1377.

Grease Seal #RG06-050 is the replacement part for the Dexter 010-019-00. It is 1.719 inches inner diameter and 2.565 inches outer diameter. It is a fit for 3500 lb axles. This is a confirmed replacement cross-reference.

Thanks for the picture! Those brakes do look identical. The Hayes/AL-KO Hydraulic Brake Assembly - Duo Servo - 12-1/4" - Left Hand/Right Hand - 9K to 12K item #K23-524-00 will work on 8,000 lbs AL-KO axles if they are 12-1/4" diameter x…