Search: gas can   >   !Oil Pan Heater   >   !Exhaust Systems   >  

We currently have not had a Ford F-150 with the power outlet in the bed to test fit a bed mounted 7-Way #C57008. I see no reason you will not be able to still install the 7-way as there is a large gap which can be seen in the installation video which…

Yes, there is. It is the Rhino-Rack Pioneer Platform Rack with Backbone Mounting System item #JB0892. This system is custom fit for your 2023 Jeep Wrangler Unlimited with a hardtop. It has a 264 lbs on-road capacity and a 176 lbs off-road capacity.…

Any scuffing of either of these tonneau covers, The Truxedo Sentry or the Truxedo Sentry CT will probably be permanent. I think it will be harder to see those imperfections on the Sentry CT because it's cover is a woven 5-layer fabric, which…

Since Valley went out of business there are no direct replacement parts that are available but a repair kit like the Curt #C25194 for 2" Curt Couplers may be compatible. What I recommend doing is replace your coupler completely as replacement…

Good morning! The Rhino-Rack Pioneer Platform Rack with Backbone Mounting System #JB0892 for your 2018 Jeep JL Wrangler Unlimited does have a weight capacity of 264 lbs but that is the dynamic weight capacity. Dynamic weight capacity is the max…

Thank you for that info and we do have a replacement for the Titan hub 17214. That hub is for 2,500 lb axles, uses inner bearing LM67048 and outer bearing LM11949; the correct replacement for that is the following: - Dexter Trailer Idler Hub Assembly…

The max amperage draw of the MaxxAir MaxxFan Mini RV roof vent part #MA00-04401M that you referenced is 5 amps.

You can connect the Rhino-Rack Pioneer Platform - Universal Mount - 48" Long x 38" Wide #RR42114BF or the larger #RR42115BF using the T-bolts. You do not need to use the universal bar clamps and will not use all of the included pieces for…

I checked with Aluma and they list a 14" Liger Wheel and Tire 60-0001396 as a replacement 14" wheel for their trailers but they do not specify the finish. We do have one 14" Liger Wheel item #LH84FR. It is gunmetal gray and has a 5 on…

Hey Craig, yes the Stromberg Carlson Jack part #SC63VR will fit with the Lippert Jack It Bike Rack part #LC429756. The width of the jack is right at 5 inches which would easily fit between the upright bars of the Jack It.

The Kenda 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range B #AM30590 have a max speed of 65 mph. When trailer tires are not speed rated with a letter, the default is 65 mph max. I've attached an article to…

To measure for safety chains you will want to have the trailer hooked up to your tow vehicle with it just about jack knifed as this is the furthest the safety chains will be stretched. You will measure from one side of the tongue where you will be…