Correct Replacement for TDE 46210 Trailer Hub
Question:
I dont see a number on the spindle. It looks like the #85. Should it be stamped somewhere?
asked by: Tim M
0
Expert Reply:
There typically aren't any part numbers stamped onto the trailer spindle that can be used for identification. There are however numbers stamped onto the hub most times which can be used for identification. The TDE46210 tells me you have a 3,500 lb axle so you can use the Trailer Idler Hub Assembly part # AKIHUB-545-35-G-EZ-K for galvanized or part # AKIHUB-545-35-K for standard.
expert reply by:
Conner L
0
Products Referenced in This Question
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- EZ Lube
- L68149 / L44649
- Marine Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: RV Bearing
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Video: In-Depth Review of the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles
- Q&A: Replacing Older Tie Down Engineering 46210 and 46845 Trailer Hubs
- Q&A: Recommended Brakes and Replacement Hub & Drum Assembly for a 2013 Forest River Sandstorm TT
- Q&A: Replacement Recommendation for TDE 46210 Hub
- Q&A: Replacement Hub for TDE Hub 46210 of Boat Trailer
- Shop: Taskmaster Provider ST205/75R14 Radial Tire with Black Machined Trinity Wheel - 5 on 4-1/2
- Shop: Dexter Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: 1-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long
- Q&A: What Kind of Grease is in the Galvanized CE Smith Trailer Idler Hub Assembly CE13515?
- Video: Step-By-Step Installation for the etrailer Hub Bearing Kit - Utility Trailer
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Q&A: Replacement for TDE Trailer Hub Part 46210 with Transcom 168255TB Seal
- Q&A: What Colors are Trailer Brake Magnets Wires
- Search Results: 46210
- Shop: Trailer Hitch
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Video: Feature Breakdown: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles
- Search Results: dx35fr
- Search Results: bearing kit
- Search Results: buddy bearing
- Search Results: bearing buddy trailer bearings races seals caps
- Search Results: leaf spring hanger
- Search Results: 25580
- Video: All About the Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers
- Video: Dexter Trailer Hub and Drum Assembly Spec Review
- Video: 3500lb Trailer Idler Hubs Direct Comparison
Explore Expert Info
![Our Expert]()
on Trailer Hubs and Drums
on Trailer Hubs and Drums
Frank
3/13/2025
incorrect information the standard 5 on 4.5 hub for a 84 spindle will not replace this hub when brakes are in the equation.. FYI