Recommended Brakes and Replacement Hub & Drum Assembly for a 2013 Forest River Sandstorm TT

Updated 04/16/2025 | Published 04/14/2025

Products Featured in This Question

Dexter Trailer Hub and Drum Assembly - 6,000 lb E-Z Lube Axles - 12" - 6 on 5-1/2

(700)

$245.07

Dexter Electric Trailer Brakes - Parking Brake Ready - 12" - Left/Right Hand Assemblies - 6K

(1756)

$491.62

Question:

I have a 2007 boat trailer that currently has disk brakes with hub p/n TDE 46264. Would like to change them over to electric drub brakes using Dexter K08-201-9B hubs and the corresponding brake assembly. All of the seal and bearing dimensions are the same, but how can I find out if the hubs will fit my spindle as to the bearing seating surfaces and spacing to my current brake flanges. The back of my current hubs are about 2.5 out from the face of the brake flange on the axle, and the wheel face sits about 4 5/16 out from my brake flanges. I cant find any detailed drawings of K08-201-9B to be able to calculate where the new hub would sit if I were to purchase them. Any help would be appreciated. Thanks

asked by: Patrick C

Expert Reply:

Hey Patrick, those dimensions don't appear to be anywhere from what I can find. While I can't give you that info, I can say that as long as the bearings fit, and you have a #11 or #12 spindle, then the Dexter Trailer Hub and Drum Assembly # K08-201-9B will fit great.

This kit does also include all the replacement bearings, grease seals, races, grease cap, wheel bolts, and lug nuts to replace all the old stuff.

For brakes, you will need the Dexter Electric Trailer Brakes # 23-112-11323-112-113, which includes the left and right hand sides, has a 5 bolt mounting pattern, and works with wheels 14 1/2", 15", and 16" in diameter.

If you need anything else, please drop a comment and let me know!

expert reply by: Bryce D