Trailer Hitch Recommendation For 2008 Dodge Sprinter 3500

Updated 12/08/2014 | Published 12/05/2014

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

(4)

$296.31

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(75)

$85.79

etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs

(1382)

$95.25

Question:

Will this Hitch work on models with 30-3/8inch frame, measured outside to outside of frame. I just bought 13255 from u guys and it does not fit so I have to send it back. I have a 2008 sprinter 144inch wb Dulley 3500. Do u have something stronger for my van like 6000-7500lb?

asked by: Marcin

Expert Reply:

If your 2008 Dodge Sprinter 3500 has a 144 in wheelbase and a factory step bumper, then the Curt Class lll Trailer Hitch, part # 13375 is designed for your van. This hitch has a 2 inch receiver opening.

This hitch has a 5,000 gross trailer weight towing capacity. This hitch is rated for up to 7,500 lbs if a weight distribution system is used.You will want to check your owner's manual or with your dealership to make sure you do not exceed the towing capacity of your van.

If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.

If you need a trailer connector at the rear of your Sprinter I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector, part # 118650.

expert reply by: Jeffrey L