Availability of CAD Diagram for Timbren Axle-Less Trailer Suspension System # A35RD545E

Published 10/09/2014

Products Featured in This Question

Timbren Axle-Less Trailer Suspension w Electric Brakes - Standard - 4" Drop - 5 on 4-1/2 - 3.5K

(25)

$1800.96

Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional

(2776)

$160.07

Question:

Can I get a CAD model of part # A35RD545E to help in the design of my trailer?

asked by: Eric A

Helpful Expert Reply:

We do have engineering diagrams for the Timbren Axle-Less Trailer Suspension System # A35RD545E that you referenced, and we do show these on our product page. If you scroll down a bit you'll find several measured drawings of this system with dimensions and mounting points.
I have also linked one of these images for your review.

This kit installs either by welding or bolting to your trailer frame and two sets can be used for a tandem-type application (but not three). Included are built-in square holes to accept standard 2-inch steel tubing for instances where reinforcement is needed or when a trailer is being built from scratch.

This Timbren kit includes the electric brake assemblies and 5-on-4-1/2 bolt pattern hubs. A brake controller such as the popular and reliable Tekonsha P2 # 90885 is required in the tow vehicle to generate the signals for the Timbren's electric drum brakes. This is a proportional controller that will allow the trailer to slow down in unison with the tow vehicle which provides for reduced brake wear on both the tow vehicle and trailer.

You might care to review the linked article on brake controllers that details much about the types available and their various advantages.

expert reply by: Adam R