Mounting Dimensions of the 3,500 lb Timbren Axle-Less Suspension System # A35RD545E

Updated 02/09/2016 | Published 02/08/2016

Question:

I am designing my trailer in autocad and would like to get drawings of the A35RD545E axle. I retraced the side and end view from the images on your website and believe they are close enough, but I couldnt find a top view. If you can send all view, then I would have a perfect fit to my drawing. Thank you

asked by: Gregory H

Expert Reply:

I have attached a top view photo with additional dimensions that should be helpful. As you may already know, this system will have 1-3/4 inches of deflection under a full load. If you are using fenders, I recommend placing the fenders 3 inches above the tires at full deflection for maximum bump clearance.

expert reply by: John H