Difference Between Ventline Roof Vent Fan Switch # BV0199-03 and # BV0199-02

Question

Question:

Are these vent fan switches interchangeable BVO 199-02 and BVO 199-03?

asked by: Andrew

0

Expert Reply:

The switches are NOT interchangeable, the # BV0199-02 operates a 110V fan motor, while # BV0199-03 operates a 12V fan motor.

expert reply by: Mike L

0

Answer 1

The Replacement Push-Button Switch for Ventline Trailer Roof Vents Item #BV0199-03 is a simple two wire lead install. As with all electrical work you'll want to ensure the power is off by turning off the breaker before removing the old switch and…

view full answer...

Answer 2

The #BV0199-03 switch is installed inline on the 12-V power source feeding the fan. One lead connects to the motor, the other to a 12-V power source. The switch was typically used on Vanair Powered vents like #VP-543SP, although Ventline used them on…

view full answer...

Answer 3

I was able to locate Fan-Tastic Vent 8613-01, however that number came back to it being the document number of the manual which covered 8 different vent/fan options. If you can provide me with the model number of your vent (which can usually be found…

view full answer...

Answer 4

Hey Missy, the part #LC359259 is what you need as we have confirmed this fits the now discontinued Power Gear 500210 leveling system that you have.

view full answer...

Answer 5

I believe you meant to type that your touch pad was part number 500210 which the Replacement Key Pad Control Unit for Power Gear Powered RV Leveling System #LC82FR is a correct replacement for.

view full answer...

Answer 6

I found an old wiring diagram for your now discontinued Power Gear 500210 control panel and it really helps show how things are supposed to work. There is a red wire running to the three jacks, the dump valve, and the float valve from the solenoid.…

view full answer...

Answer 7

To replace your Fan-Tastic 6000BTA I recommend using the Fan-Tastic Vent Roof Vent w/ 12V Fan and Thermostat - Powered Lift #FV803350, which has a powered lift and 3 speeds. If you wanted something with a manual lift the Fan-Tastic Vent Roof Vent w/…

view full answer...

Answer 8

We have the Replacement Push-Button Switch #BV0199-03 that fits with the hole in the Replacement Screen Frame #BVC0515-05. The Replacement Fan Blade #BVD0217-00 works with the 1-1/2" long Replacement 12V DC Motor #BVD0218-00. You will need to…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Difference Between Ventline Roof Vent Fan Switch # BV0199-03 and # BV0199-02

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching