Replacement Control Panel for Power Gear 500210

Question

Question:

Good Morning! I am looking for Power Gear Part 500210? please advise if you are able to help?

asked by: Missy

0

Expert Reply:

Hey Missy, the part # LC359259 is what you need as we have confirmed this fits the now discontinued Power Gear 500210 leveling system that you have.

expert reply by: Jameson C

0

Jameson C.

12/1/2025

Hey Missy, did the replacement control kit work well with your Power Gear leveling system? Knowing how it fit could help others replacing the same discontinued part.

Missy

12/2/2025

@JamesonC Thank you for checking in. We ended up not needing the Power Gear Leveling system.

Jameson C.

12/2/2025

@Missy no prob! Glad you got it figured out!

Answer 1

The #BV0199-03 switch is installed inline on the 12-V power source feeding the fan. One lead connects to the motor, the other to a 12-V power source. The switch was typically used on Vanair Powered vents like #VP-543SP, although Ventline used them on…

view full answer...

Answer 2

The Replacement Push-Button Switch for Ventline Trailer Roof Vents Item #BV0199-03 is a simple two wire lead install. As with all electrical work you'll want to ensure the power is off by turning off the breaker before removing the old switch and…

view full answer...

Answer 3

The switches are NOT interchangeable, the #BV0199-02 operates a 110V fan motor, while #BV0199-03 operates a 12V fan motor.

view full answer...

Answer 4

According to my contact at Advent Air, their #ACDOM150 would be the correct replacement for your Dometic 459516.701C0 RV AC unit. The unit will replace your existing roof unit, and will plug into the existing distribution box and thermostat. The unit…

view full answer...

Answer 5

The Dometic model B59516 is showing up as a Brisk II 15K BTU unit so the only thing you'll need to check is what style connector your current unit has. If you remove the cover for the air distribution box inside the trailer you should see the…

view full answer...

Answer 6

To be completely honest the sway control feature of the B and W Continuum part #BW78FR isn't nearly as advanced as the rest of the system. The advertised sway control of this system is in the head of the system between where the ball and the…

view full answer...

Answer 7

The B&W Continuum Weight Distribution System #BW28FR works to reduce sway from occurring by distributing the tongue weight evenly across your vehicle. It does not have a physical sway prevention like a Friction Sway Bar #17200 or other weight…

view full answer...

Answer 8

The B&W Continuum #BW78FR and the Reese Strait-Line #RP66083 are both great systems. The B&W Continuum is going to be easier to set up, but as far as sway control goes, I definitely have to give the edge to the Reese Strait-Line. The…

view full answer...

Answer 9

I believe you meant to type that your touch pad was part number 500210 which the Replacement Key Pad Control Unit for Power Gear Powered RV Leveling System #LC82FR is a correct replacement for.

view full answer...

Answer 10

I found an old wiring diagram for your now discontinued Power Gear 500210 control panel and it really helps show how things are supposed to work. There is a red wire running to the three jacks, the dump valve, and the float valve from the solenoid.…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Replacement Control Panel for Power Gear 500210

Continue Researching