Power Gear 500210 Replacement Touch Pad Control Unit

Question

Question:

Have a touch pad 500212 for Power gear leveling for 1996 fleetwood discovery motorhome. Looking to see if that is the same you sell. Mine is 2.5 inches by 5.5 like one you had with 8 wire and 6 wire and a none used 2 wire thank you.

asked by: Steve S

0

Expert Reply:

I believe you meant to type that your touch pad was part number 500210 which the Replacement Key Pad Control Unit for Power Gear Powered RV Leveling System # LC82FR is a correct replacement for.

expert reply by: Jameson C

0

Martial S.

9/3/2025

Bonjour Jameson oui ma question est est-il correct de remplacer le power gear 500210 par lc82fr et ou je peut le commander et quelle en est le prix MERCI

Jameson C.

9/3/2025

@MartialS If you click the link to that part number you'll be taken to a produce page where you can hit add to cart.

Martial

9/3/2025

@JamesonC Merci pour la réponse . D'on si je comprend bien le LC82FR remplace très bien le 500210 pour national tropical 1996 model 210, mais si je regarde a l'arrière le connecteur placé face a la touche ON le 500210 a seulement deux places et celui du LC82FR a 4 places Pour moi ce n'est pas clair MERCI

Jameson C.

9/3/2025

@Martial To upgrade from your 500210 Power Gear Touch Pad you will in fact need the Replacement Lippert Components Power Gear Manual Leveling Control Kit # LC359259, which comes with a new touch pad, 8-pin harness and 6-pin harness. A 4-pin harness will not be used with this upgrade.

Answer 1

I reached out to my contact at Lippert and he said that it sounds like you have an older Power Gear Manual Leveling kit that had the ground running from the solenoid to the control board. This new kit, part #LC359259, can be used as a replacement but…

view full answer...

Answer 2

Are you only installing the #LC82FR (500731)? To replace your 500210 you will need the full kit #LC359259. There are also wiring changes you will have to make at the pump assembly before it will work. After speaking with Lippert it sounds like this…

view full answer...

Answer 3

To upgrade from your 500210 Power Gear Touch Pad you will in fact need the Replacement Lippert Components Power Gear Manual Leveling Control Kit #LC359259, which comes with a new touch pad, 8-pin harness and 6-pin harness. A 4-pin harness will not be…

view full answer...

Answer 4

I found an old wiring diagram for your now discontinued Power Gear 500210 control panel and it really helps show how things are supposed to work. There is a red wire running to the three jacks, the dump valve, and the float valve from the solenoid.…

view full answer...

Answer 5

Yes, The Replacement Key Pad Control Unit for Power Gear Powered RV Leveling System #LC82FR is the correct key pad control unit you will need per Lippert for your 1998 Chevy Southwind Storm Motorhome using the 500210 Milwaukee cylinder board. I…

view full answer...

Answer 6

Sounds like the control panel was fried when the dealer messed up the wiring. Only solution will be an all new control panel with the part #LC359259 which we have confirmed fits the now discontinued Power Gear 500210 leveling system.

view full answer...

Answer 7

I believe you will need the Replacement Lippert Power Gear Manual Leveling Control Kit #LC359259 for your 1996 Fleetwood Discovery. You will need to remove the control panel to determine if you have the old style wiring connection or the new style…

view full answer...

Answer 8

The plug that includes the red wire from the Replacement Lippert Power Gear Manual Leveling Control Kit #LC359259 will plug into the back of the control panel and then the other end will plug into the connector coming off of the pump. The other…

view full answer...

Answer 9

The switches are NOT interchangeable, the #BV0199-02 operates a 110V fan motor, while #BV0199-03 operates a 12V fan motor.

view full answer...

Answer 10

The #BV0199-03 switch is installed inline on the 12-V power source feeding the fan. One lead connects to the motor, the other to a 12-V power source. The switch was typically used on Vanair Powered vents like #VP-543SP, although Ventline used them on…

view full answer...

Answer 11

The Replacement Push-Button Switch for Ventline Trailer Roof Vents Item #BV0199-03 is a simple two wire lead install. As with all electrical work you'll want to ensure the power is off by turning off the breaker before removing the old switch and…

view full answer...

Answer 12

The Replacement Lippert Power Gear Manual Leveling Control Kit part #LC359259 although compatible does not offer plug-in-play installation with some of the older Power Gear leveling systems. Therefore, modifications to the wiring will be needed. I…

view full answer...

Power Gear 500210 Replacement Touch Pad Control Unit

Continue Researching