bing tracking image
Q & A Icon

Looking for Trailer Jack with 2 inch Outer Diameter  

Updated 09/15/2026 | Published 09/11/2026

Question:

Hello, I need to know the outside diameter of the tubing used in your Round A-Frame Trailer Jack - Sidewind - 15 Lift - 2,000 lbs - Black Part Number: TJA-2000S-B I need 2 inch diameter tubing, no larger. Thanks,

0

Expert Reply:

Hey Jack, the outer tube of the etrailer jack part # TJA-2000S-B you referenced is 2-1/4 inches and the inner tube diameter is 2 inches. Do you need the inner or outer diameter to be 2 inches?

If you need a jack with an outer diameter of 2 inches we have the Dutton Lainson # DL22530.

expert reply by:
0
Jameson C
Jack S. profile picture

Jack S.

9/15/2026

Hi Jameson, The DL22530 is very close to what I'm looking for - the 2" outer tubing. However the crank needs to be on the front of the jack directly above the flat point of the mounting plate. Otherwise the crank would come in contact with the LP tanks. What might you have that would work? Thanks, Jack

Jameson C. profile picture
Etrailer Expert

Jameson C.

9/15/2026

@JackS I wish we had a different version of the jack that had the handle orientated differently but this is only option we have.
Jameson C. profile picture
Etrailer Expert

Jameson C.

9/15/2026

@JackS I wish we had a different version of the jack that had the handle orientated differently but this is only option we have.
Stephen profile picture

Stephen

9/15/2026

Sound like you are try to upgrade on a vintage camper You will need to remember out the existing hole That can be done with a de burring tool or a old fashioned metal file I have done the a hundred times. Good luck

Jameson C. profile picture
Etrailer Expert

Jameson C.

9/15/2026

@Stephen that's a good tip and I bet that is what's going on.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>