Does The Hub Saver Wheel Protector Replace The Spindle Washer?
Updated 09/01/2026 | Published 08/27/2026 >
Question:
I’m trying to install mine now and thought I saw in the video that the hub saver replaced the washer, the directions say the same in the picture, but saw an answer to a question saying the washer goes on as well.. Should I include both? I’m having trouble with the hub saver hitting my Bearing Buddy, causing tension on the wheel when it turns as well. The hub saver doesn’t center because it doesn’t have the axle notch like the washers do. I’m wondering what’s going on with this new hub saver introduced into my normal bearing replacement. Maybe I have the wrong size, but it says it’s for my axle, I believe and was linked off my purchased bearings. It’s making me nervous about its use… maybe using these requires just a basic hub cap instead of the bearing buddy? I appreciate any advice. *will have to get pictures tomorrow, it’s late.
asked by: Joey S
Expert Reply:
Hey Joey, thanks for reaching out. The Hub Saver # HS79FR is designed to replace the existing spindle washer, so you do not want to use both. The original washer gets permanently removed, and the Hub Saver takes its place between the outer bearing and spindle nut.
The Hub Saver also needs to sit flat and centered on the spindle. If it is contacting your Bearing Buddy or creating enough tension that the hub starts dragging when you turn it, something is not right with the fit or installation. I would not tow it like that. The Hub Saver itself does not require you to get rid of the Bearing Buddy and switch to a basic dust cap.
What trailer are you installing the hub savers on?
Product Page this Question was Asked From
Hub Saver Hub and Wheel Protector - Fits 4, 5, and 6-Lug Trailers - Qty 2
- Trailer Bearings Races Seals Caps
- Hub and Rim Protector
- Bearing L44643
- Bearing L44649
- Race L44610
- 2500 lbs Axle
- 3000 lbs Axle
- 3500 lbs Axle
- 4200 lbs Axle
- The Hub Saver
more information >
Continue Researching
- Search Results: lip seal
- Search Results: kaln1375s
- Shop: Lippert Grease Seals - Double Lip - ID 1.5" / OD 1.987" for 2K to 2.5K Axles
- Search Results: hub
- Search Results: l44610
- Search Results: l44649
- Search Results: l44649 bearing
- Q&A: Will The Hub Saver HS79FR Keep The Hub In Place If The Castle Nut Comes Loose?
- Video: Review of Kenda Trailer Tires and Wheels - Tire Only - AM10068
- Shop: Hub Saver Hub and Wheel Protector - Fits 8-Lug Trailers - Qty 2
- Shop: Hub Saver Hub and Wheel Protector - Fits 4, 5, and 6-Lug Trailers - Qty 2
- Q&A: Highest Speed Load Range C 12 Inch Radial Trailer Tire to Stop Blowouts
- Q&A: Recommended Center Cap for Aluminum Wheels on Trailer with EZ Lube Axle
- Shop: Grease Seals - Double Lip - I.D. 1.500" / O.D. 1.987" - EZ Lube 2K to 2.5K Axles - Qty 2
- Shop: Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel - Qty 2
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Grease Seal - Double Lip - I.D. 1.719" / O.D. 2.565" for 3.5K and 4.4K Axles - Qty 2
- Q&A: Which Hub to Use for 2,200 lb Dexter Axle 8-258 or 8-259
- Q&A: Recommended Idler Hub To Replace Shorelandr SS818 Hub
- Q&A: Can The Capacity Of An Axle Be Determined By Looking At The Hubs?
- Search Results: hydraulic drum brakes trailer brakes
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Suspension Enhancement
- Shop: Brake Controller


