Which Hub to Use for 2,200 lb Dexter Axle 8-258 or 8-259
Published 06/15/2016 >
Products Featured in This Question
Question:
My hub part number is 8-259. Problem is the hub I have looks like a 8-258. Could this be an older hub style, and which should I use? I attached pics of my current hub.
asked by: Darik
Expert Reply:
Thanks for the pictures. Either part number hub is going to fit your hub since they both have the same bolt pattern and bearings. The difference is going to be based on the diameter of your trailer wheels.
If you have 13-14 inch diameter rims you would want the part # 8-258-5UC1. If you have smaller wheels that are 10-12 inch you would want the # 8-259-5UC1-EZ. The difference is the size of the wheel mounting flange.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L44649 / L44649
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Search Results: rv leveling blocks
- Search Results: rv steps
- Search Results: dexter trailer axles
- Search Results: lip seal
- Search Results: trailer hubs and drums
- Search Results: trailer scissor jack
- Search Results: scissor stabilizer jack
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Trailer Idler Hub Assembly - 2,000-lb and 2,200-lb E-Z Lube Axles - Pre-Greased - 5 on 4-1/2
- Video: Lippert Outriggers for Manual RV Steps Spec Review
- Shop: Lippert Grease Seals - Double Lip - ID 1.5" / OD 1.987" for 2K to 2.5K Axles
- Shop: Lippert Leveling Blocks with Bag for Trailers and RVs - 8-1/2" Square - Qty 10
- Q&A: Does The Hub Saver Wheel Protector Replace The Spindle Washer?
- Video: Review of Dexter Trailer Hubs and Drums - Pregreased Idler Hub - 8-259-5UC1-EZ
- Shop: Lippert Manual Pull-Out Step for RVs - Single - 7" Drop - 24-1/4" Wide - Steel - 300 lbs
- Shop: Lippert Outriggers for Manual RV Steps
- Video: Review of Dexter Trailer Suspension Parts - Equalizer With Nylatron Bushing - DX44VC
- Q&A: Will The Hub Saver HS79FR Keep The Hub In Place If The Castle Nut Comes Loose?
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4 - Pre-Greased
- Shop: Tire Chains
- Q&A: How To Install Lippert Outriggers To Your RV To Install New Pull Out Steps
- Q&A: Can Tire Chains be Used with a 2024 Toyota Rav4 Prime With 235/55/R19 Tires
- Video: Hands-On with the Titan Chain Snow Tire Chains
- Video: Titan Chain Diagonal Alloy Cable Snow Tire Chains Road Test TC315DC
- Video: Best 2024 Toyota RAV4 Tire Chain Picks
- Video: Review of Kenda Trailer Tires and Wheels - Tire Only - AM10068
- Q&A: Highest Speed Load Range C 12 Inch Radial Trailer Tire to Stop Blowouts
- Q&A: Recommended Center Cap for Aluminum Wheels on Trailer with EZ Lube Axle
- Q&A: Idler Hub for 2,200 lb Dexter Torsion Axle
- Article: Hitch Anti-Rattle Devices: The Ultimate Guide


