When Should I Torque MORryde CRE3000 Suspension Bolts?
Updated 08/12/2026 | Published 08/11/2026 >
Products Featured in This Question
Question:
Hello, I am installing new leaf springs, morryde cre3000, morryde shackle kit, and one single morryde X factor for center hanger. I don’t plan to do the final torque until everything is back on the wheels supported by its own weight. My question is should I roll the trailer back and forth a few times as well or just sitting back on the tires is enough to ensure everything is as it should be. Then rechecking the torque at suggested mileage according to directions is all that’s required. Thank you.
asked by: Braden C
Expert Reply:
Hey Braden, thanks for reaching out. That's exactly how I'd do it. Leave everything just snug enough to hold it together while you're installing the springs, CRE3000, shackles, and X-Factor. Once the trailer is back on the ground supporting its own weight, roll it forward and backward a few feet. That lets the suspension settle into its natural position and takes any twist or bind out of the bushings and equalizers.
After that, torque all of the spring eye bolts and shackle bolts to MORryde's specs. Then tow it 50 to 100 miles and give everything another torque check. That's all it takes. It'll help ensure the new components seat properly and everything stays tight.
All that said, here is a list of the parts you'll need:
- MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps # MR46ZR
Or if your trailer currently uses 3-1/8" long shackles use # MR76ZR instead.
For the CRE3000 you'll need part # MR87ZR for 33" wheelbase, or # MR27ZR for 35" wheelbase.
Then the X-factor crossmember is part # MR33WR.
I see you already got leaf springs on order so just grab some new U-bolt kits # CE23002 and that will cover everything.
What kind of trailer do you have?
Product Page this Question was Asked From
MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Trailer Suspension Parts
- Suspension Kits
- Boat Trailer
- Snowmobile Trailer
- 2-1/4 Inch Long
- Tandem Axle
- MORryde
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Lippert U-Bolt and Nut Kit for 3,500-lb Trailer Axles - 2-3/8" Wide
- Q&A: Can I Use A 4,000 lb Leaf Spring For A 3,500 lb Axle?
- Search Results: blue ox track pro
- Search Results: 1/2 20 lug nuts
- Shop: CE Smith U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts - Zinc
- Shop: Replacement Hardware Kit for Blue Ox TrackPro Weight Distribution Systems
- Shop: Replacement Hardware Kit for Blue Ox SwayPro Weight Distribution Systems
- Q&A: Replacement Leaf Springs for 2022 Sun Lite 16BH With Dexter Axle
- Q&A: Looking For Electric Jack That Can Be Rotated 90 Degrees
- Shop: U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts
- Shop: etrailer Electric Trailer Jack w/ 7-Way and SnapPad - Drop Leg - A-Frame - 18" Lift - 5,000 lbs
- Shop: 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 26" Long
- Video: What to Know About the 6-Leaf Double-Eye Spring for 4,500-lb Trailer Axles
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Video: Measuring To Choose The Right Trailer Axle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Wiring
- Search Results: trailer tires and wheels
- Search Results: trailer jack
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS
- Shop: Suspension Enhancement
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Brake Controller
- Search Results: trailer leaf springs



Gary
8/12/2026
My trailer came with MORryde from the factory. It is a quality trailer with quality parts. They do wear out though, so I replaced them with a like item.