bing tracking image
Q & A Icon

How To Raise the Axle on a Escape 17B Camper?  

Updated 08/15/2026 | Published 08/10/2026

Question:

I have an escape 17b with a dexter axle sn 122363592. I am looking to do a lift. Which lift kit do I need? Is this a 10 axle? Christina

0

Expert Reply:

Hi Christina,

I wasn't able to figure out what axle you have based on the serial number, but since the label shows the axle was made in 2020, I searched for a 2020 Escape 17B and it should be a Dexter Torflex #10 Torsion axle. The Torflex axle is rated for 3,500lbs and has EZ-lube hubs on it. If you have a torsion axle there aren't any leaf springs because torsion axles connect directly to the frame and have rubber cords inside the axle. If you do have a torsion axle you can use the Dexter Torflex Lift Kit for Single AxlevPart # K71-707-01. This lift kit will raise the axle 2 5/8" between the frame and axle and works with Torflex axles rated for 2,500lbs to 4,400lbs. The spacers in this kit attach to the side mounted brackets on the frame so if you have a top mounted torsion axle it won't be compatible.

If you have a regular round tube axle that has double eye leaf springs and an equalizers you can use a different Dexter lift kit to raise the axle. If the axle is 2 3/8" in diameter, you'll need the Dexter Trailer Springs Over-Under Conversion Kit Part # K71-384-00. If you have a 3" diameter axle you can use the Dexter Trailer Springs Over-Under Conversion Kit Part # K71-385-00. Both kits will raise the axle 4.5" to 5" but are only intended to be used with round tube axles with a suspension.

Are you trying to raise the camper to get more clearance for going off road?

expert reply by:
0
Claire H

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>