Lift Kit for 2020 E-Pro E19FD With Dexter #10F Torflex Axle

Updated 10/26/2025 | Published 10/21/2025

Question:

Simply wanting to confirm that the K71-707-01 is the correct lift-kit that I would need to lift my 2020 E-Pro E19FD that has a Dexter Torflex 10F / 4000 / Single Axle see attached photos…. Thanks!

asked by: Dennis B

Axle Tag
(click to enlarge)

Expert Reply:

Hey Dennis! Since you have the #10F axle with a 4,000 lb capacity the Torflex Lift Kit - Single Axle - 2-7/8" Lift # K71-707-01 is the correct kit. The F designation is for the higher 4k capacity since the standard #10 tops out at 3,500 lbs. This will match your existing mounting holes which are 8" apart on center.

Any big trips coming up with your 2020 E-Pro E19FD?

expert reply by: Robin H

Dennis B.

10/26/2025

Robin H:: Thanks for the reply! I appreciate the clarification about the difference between the #10 and the #10F. Would you also happen to know if that is the highest weight rating for the #10 Torflex Single Axle? Is there a Torflex Single Axle with a higher weight rating? Just curious. I’ll double-check the 8” center-to-center spacing, and plan on placing an order. I’m looking forward to being able to put the entry stairs down without having to hassle with the stairs (remove the feet) because they deploy too low to the ground. Thanks again for the feedback and advice! ::Dennis B

Robin H.

10/26/2025

@DennisB as far as I know 4k is the max for a #10 but there are always custom axles rolling around that don't fit the standard. Good idea to double check the spacing, that is really the key to fitment.