Hub Recommendation to Convert Dexter 7k Axle to Oil Bath
Published 01/16/2018
Question:
I currently have Dexter 7k single tandem 8 x 6.5 grease axles... Looking to upgrade to oil bath... do you sell a hub kit that will fit... any advice or recommendations?
asked by: Derek P
0
Expert Reply:
We have the Dexter Hub and Drum part # 8-219-9UC3-A which is a 7k oil bath hub and drum. It would fit your current axle perfectly and allow you to convert it to oil bath.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 5,200-lb to 7,000-lb Axles - 8 on 6-1/2 - Oil Bath
- Trailer Hubs and Drums
- Hub with Drum
- Oil Bath
- 25580 / 14125A
- Standard Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Search Results: oil bath hubs
- Search Results: brake magnets
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb to 7,000-lb Axles - 8 on 6-1/2 - Oil Bath
- Search Results: center wheel caps wheel covers hubcaps
- Shop: Valcrum Hydro-Shield Waterproof Aluminum Oil Bath or Grease Cap for 6K to 9K Axles
- Search Results: oil bath hub caps
- Search Results: valcrum trailer bearings races seals caps
- Search Results: oil bath caps
- Search Results: morryde x factor
- Shop: Goodyear Endurance ST235/80R16 Radial Tire w/ 16" Eagle Aluminum Wheel - 8 on 6-1/2 - LR E
- Shop: Dexter Bearing Kit, 14125A/ 25580 Bearings, 10-36 Seal
- Shop: Dexter Trailer Hub and Drum Assembly - 7K E-Z Lube Axle - 8 on 6-1/2 - Pre-Greased - 1/2" Stud
- Shop: Replacement Trailer Brake Magnet for 12" Brake Assemblies
- Shop: Replacement Trailer Brake Magnet for Dexter Electric Brake Assemblies
- Q&A: What's Difference Between Trailer Hubs # 8-219-9UC3 and # 8-219-9UC3A
- Video: Replacement Trailer Brake Magnet for 12" Brake Assemblies Review
- Video: Rock-Solid Stability in Seconds – MORryde Shows Us How
- Q&A: Converting Standard 7K Grease Hubs to Oil Bath Hubs
- Video: Breaking Down the Kodiak XL ProLube Kit for for 5,200-lb to 6,000-lb Axles
- Q&A: Is Lubrication Required for the Roller Pin on the Roadmaster Comfort Ride Slipper Spring System
- Q&A: Recommended Conversion Kit for Disc Brakes On 7,000 Lb Dexter Axles
- Video: MORryde X-Factor Crossmember Installation - 2020 Grand Design Momentum 5W Toy Hauler
- Video: MORryde Hitch Mounted Stabilizer for 2" Trailer Hitches Feature Review
- Video: In-Depth Review of the Unitized Oil Seal for Trailer Hubs
- Q&A: Upgrading Dexter 8-222 Trailer Hubs
- Video: An In-Depth Look at the MORryde X-Factor Crossmember for Standard Frame Hangers
- Q&A: Replacement Bearing With 1.75 Inch Inner Diameter
- Shop: Brake Controller
- Q&A: What is the Proper Gauge Wire for Installation of a Brake Controller and Trailer Brakes
- Shop: Trailer Hitch