Best Wedge For Lippert Turning Point Pin Box And B&W Patriot 5th Wheel Hitch

Question

Question:

Looking for a wedge for the turning point pin box to a bandw patriot. Thanks

asked by: Michael Z

0

Expert Reply:

Hey Michael, thanks for reaching out. We do have a wedge that will work with your Lippert Turning Point pin box and B&W patriot 5th wheel hitch. For that you'll need the following:

- Replacement Wedge Block for Lippert Turning Point Pin Box # LC79UD

This is a universal wedge that has been confirmed to fit both the Lippert Turning Point pin boxes and B&W fifth wheel hitches.

What kind of 5th wheel are you hauling?

expert reply by: Jesse M

0

Replacement Wedge Block for Lippert Turning Point Pin Box
(click to enlarge)

Michael Z.

8/4/2026

I'm towing a 2019 Grand Design Reflection 295RL

Answer 1

Hey Vernan! Since your Coleman-Mach AC is a 48000 series you need the Soft Start Kit for Coleman-Mach RV Air Conditioners #CM56RR. This is specifically designed to fit Coleman-Mach Series 45000, 47000, and 48000 air conditioners like yours. What kind…

view full answer...

Answer 2

Hey John, as long as you install the Replacement MaxxFan Plus 4-Speed Roof Vent with White Lid #MA00-04751KSX properly and have the lid open facing the rear of the trailer this would easily handle highway speeds without getting blown off. By chance…

view full answer...

Answer 3

Hi Shawn! You're dealing with a common issue when installing a MaxxAir II cover #MA76JR on a MaxxFan 4751KS, like the #MA00-04751KSX. Here’s the situation you're running into: -First, the MaxxFan lid opens almost vertical when fully opened…

view full answer...

Answer 4

Hi Tony! I did a lot of searching for the lid to that fits your Shurflo Polar-Aire 1, but came up dry. It looks like these were discontinued quite some time ago and the replacement bits are gone, unfortunately. Unless you are able to locate one…

view full answer...

Answer 5

Hey Bill, yes the Furrion Vision S+ #FR64AD would be a direct replacement for your current Vision S system. None of it is backwards compatible with the standard Vision S system though.

view full answer...

Answer 6

The Replacement Wedge Block for Lippert Turning Point Pin Box #LC79UD is a universal wedge that has been confirmed to fit both the Lippert Turning Point pin boxes and B&W fifth wheel hitches. If you bought a trailer secondhand and didn't have…

view full answer...

Answer 7

Hey Greg, welcome back! Since we know your 2023 Montana High Country has a Lippert 1116 style pin box the correct Sidewinder replacement you'd need is the part #RP77FR. The correct wedge to use this with your B and W fifth wheel hitch would be…

view full answer...

Answer 8

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 9

If you are having trouble fitting the wedge that came with your Lippert Turning Point pin box to your 18K B&W Patriot #BWRVK3255 then you can use the Custom Wedge #SWW-06 instead. This is actually designed for use with the Reese Sidewinder pin…

view full answer...

Answer 10

The Replacement Wedge Block for Lippert Turning Point Pin Box #LC79UD would be the same generic wedge kit that came with your Lippert Turning Point pin box. The B&W Fifth Wheel Wedge Kit #SWW-06 would be the best option for your B&W Companion…

view full answer...

Answer 11

Hey Glenn, the correct wedge to use with a Curt A20 #C16140 and a Turning Point Pin Box is the wedge #C16992. What camper do you have the Turning Point installed on?

view full answer...

Answer 12

A wedge is needed, yes, and the Lippert Turning Point pin box does come with a universal wedge, but it is not a very good fit with the B&W Companion #BWRVK3710. So I highly recommend instead using the 5th Airborne Custom Wedge for B&W Fifth…

view full answer...

Best Wedge For Lippert Turning Point Pin Box And B&W Patriot 5th Wheel Hitch

Product Page this Question was Asked From

Continue Researching