Roof Vent Cover Recommendation for Ventline Ventadome Roof Vent

Question

Question:

Hi I am interested in putting a vent cover on this item can you direct me in what size to order?

asked by: Nick P

0

Expert Reply:

You would need the standard MaxxAir Vent Cover part # MA00-933069 as a vent cover for the top of the Ventline E-Z Lift Ventadome # V3092-603-00. This cove allows you to leave the vent open even if there's rain and not worry about water getting in.

expert reply by: Jameson C

0

click to enlarge

Wade

8/23/2025

Will the MaxxAir Vent Cover MA00-955002 attach directly to the tabs on the Ventline Roof Vent?

Reply

Jameson C.

8/25/2025

@Wade it would not as it only fits directly to the MaxxFan brand of roof vents.

Reply

Answer 1

If the Ventadome roof vent you have on your trailer has four mounting points then the replacement vent cover is part #BVE0108-03. This dome is designed to fit #V3092-601-00, #V3092-603-00, #V3094-601-00, #V3094-601-00C, #V3094-603-00, and…

view full answer...

Answer 2

Assuming the Interstate batteries you have now are 10 5/16" long x 7 1/8" wide x 11" tall then I recommend the NOCO Commercial Grade Battery Box part #329-HM485. This box measures 26-3/8" long x 24-3/8" wide x 12-1/2"…

view full answer...

Answer 3

The replacement dome for your E-Z Lift Ventadome Trailer Roof Vent is part #BVE0108-03. This is a smoke-colored polypropylene cover and is designed to fit your roof vent. If you want a white replacement cover for your vent, then you need part…

view full answer...

Answer 4

Hey Uriah, thanks for reaching out! The Tradesman Vaquero Self-Contained Hydraulic A-Frame Trailer Jack #ST86FR will work best if it's hardwired to a battery on your trailer, but you can also hardwire a 7-Way plug and lead like part #H20043 and…

view full answer...

Answer 5

Most square trailer roof vents are the 14 x 14 size that fit into a roof opening of 14-1/4 x 14-1/4-inches. This is the vent size that Replacement Dome Assembly #BVD0449-A03 will fit. You will want to check the type of hinge you have on your vent…

view full answer...

Answer 6

So long as you do not have a dually the answer is yes. The Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers item #AL29DQ are compatible with in bed hitches like the B&W item #BW73FR when installed on a 2025 Ford…

view full answer...

Answer 7

Hey Stephen. The Thule RV Wheel Levelers item #TH307617, you were looking at, have three different leveling heights; 4-1/2", 3", and 1-3/4" and are only designed to be used as a pair. They have a 10,000 lbs capacity. For what…

view full answer...

Answer 8

Hey Greg, congrats on the new trailer. Let's start with any part numbers or manufacturer labels, cutout size, color, and features on the one you currently have. You can add this information and any other questions you have where it says Reply to…

view full answer...

Answer 9

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Answer 10

Hey Vicki! To replace your RV's roof you'll need a replacement kit like the LaSalle Bristol RV Roof Replacement Kit w/ XTRM Membrane item #344270KIT30. This ones for a 30' RV but we've got quite a few size options. This installation…

view full answer...

Roof Vent Cover Recommendation for Ventline Ventadome Roof Vent

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching